efi intake

R

roan65

Member

May 17, 2003

103

0

16

Wasilla Alaska

Feb 7, 2006

#1

• Feb 7, 2006

• #1

After a few phone calls, several hours of searching the net and forums, and posting in 5.0 tech I still need some help!


The 5.0 I'm using has a 70mm edlebrock performer intake and throttle body on it. I bought Ron Morris's intake tube but it will not fit over the 70 mm throttle body. I called him back and to be honest he wasn't much help! I'm thinking I need a cold air intake, but I have no idea what will fit. Are there differant size intake tubes? I know it nees a fairly tight bend to clear the shock tower. I am using Ron Morris's EGR elimantaor so I get a little extra room. Any recomendations??

 

red65

Member

Apr 12, 2003

411

0

17

Ann Arbor, MI

Feb 7, 2006

#2

• Feb 7, 2006

• #2

It's not as nice looking as a hard intake tube, but the stock Mustang rubber hose/elbow fits over a 70MM throttle body with only a little stretching. Another option may be to use a silicone "turbo hose" to make the connection. They're pretty stretchy - I was able to get an elbow with a nominal 3" ID to slide over my 70mm throttle body (which measures more like 3-1/4" in diameter) with just a little grunting and persuasion. Summit carries Turbonetics hoses, or you can order directly from www.turbohoses.com. I've used both, and they appear to be the same construction. Hope that helps, a little...

 

R

roan65

Member

May 17, 2003

103

0

16

Wasilla Alaska

Feb 7, 2006

#3

• Feb 7, 2006

• #3

so what intake tube did you use red? the stock plastic?

 

Tubo(2-bo)

Member

Mar 25, 2004

279

0

16

Ft Walton Beach FL.

Feb 8, 2006

#4

• Feb 8, 2006

• #4

I a used BBK intake tube & K&N filter, works w/my stock MAF or the 70mm Cobra I have. Though come to think of it, I havent tried the 70mm in the car, just trial fitted on the bench.

 

red65

Member

Apr 12, 2003

411

0

17

Ann Arbor, MI

Feb 8, 2006

#5

• Feb 8, 2006

• #5

roan65 said:

so what intake tube did you use red? the stock plastic?

Click to expand...

Initially, I used the stock rubber hose, and it worked fine for a year. This winter, I installed a Novi1000, and used a turbo hose connector with a discharge tube that I fabricated. So, I've used both - either one works just fine.

 

R

roan65

Member

May 17, 2003

103

0

16

Wasilla Alaska

Feb 8, 2006

#6

• Feb 8, 2006

• #6

tubo,
do you know what the outside dia of the bbk is? I'll see if I can make a few more calls and see what I can come up with. Thanks guys!