• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

EFI or carb ?

  • Thread starter Thread starter wildstang90
  • Start date Start date Jun 9, 2008

wildstang90

New Member
Nov 24, 2004
87
0
0
Bristol, TN
Jun 9, 2008
#1
  • Jun 9, 2008
  • #1
To start off I have a 90 LX 5.0. I am setting the car up for the drag strip kinda doing a low cost build. After reading about a few people doing the efi to carb swap what bould be be better running the fuel injection or converting it to carb. how much is envolved in doing the swap and what kinda cost vs buying a new intake TB mass air and the rest of the efi kinda stuff. All pros and cons welcome I am just trying to find out whats going to be best for a car thats going to be on the track most if not all of the time.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jun 9, 2008
#2
  • Jun 9, 2008
  • #2
Well, last time i started throwing out prices everyone tried to call me on it (even though i was quoting prices directly off Summit's site) so i won't bother with that again...do a search and you'll find a lot of those threads.

Suffice to say, it's gonna be cheaper. Period. You won't pass emissions so keep that in mind, and you need to know how to tune a carb or you're just gonna make a mess for yourself.

That said, the 2 biggest issues are with the fuel and ignition. With the fuel, the problem is the pump and the tank. Some people say you can get away with using a regulator to regulate the stock EFI pump down to the 6-7psi that a carb needs, but that's a recipe for disaster if you ask me. The right way is to either sump the stock tank and run an electric in-line pump designed for a carb, or even to switch over to an '85 style tank (which may actually be easier and cheaper). You could even go so far as to switch the timing chain cover and run a mechanical fuel pump if you wanted.

Second, the ignition, is a lot easier. You need an EFI style distributor and your choice of ignitions....you could run the stock Duraspark, an MSD box, or even get an HEI conversion and have your ignition right on the distributor for a clean and simple install (i run a Mallory Comp 9000 distributor that has the ignition built in...very simple).

After all that you just need to decide what your ultimate goal is with the car and then you can start picking intakes and carbs and cams etc.
 

elderstang

New Member
Jun 2, 2008
23
0
1
Taylorsville, KY
Jun 10, 2008
#3
  • Jun 10, 2008
  • #3
ive been running the stock fuel pump from efi on my carbed 5.0 for 5 years now and it works very well. You just need to be sure to install a "T" in the line for the return back to the tank. Carbdford.com has a lot of info. check it out.
 

Killer50stang

New Member
May 11, 2004
632
0
0
Jun 10, 2008
#4
  • Jun 10, 2008
  • #4
wildstang90 said:
To start off I have a 90 LX 5.0. I am setting the car up for the drag strip kinda doing a low cost build. After reading about a few people doing the efi to carb swap what bould be be better running the fuel injection or converting it to carb. how much is envolved in doing the swap and what kinda cost vs buying a new intake TB mass air and the rest of the efi kinda stuff. All pros and cons welcome I am just trying to find out whats going to be best for a car thats going to be on the track most if not all of the time.
Click to expand...

Cost is so much cheaper on Carb. Easier to work on too.
 

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Jun 10, 2008
#5
  • Jun 10, 2008
  • #5
elderstang said:
ive been running the stock fuel pump from efi on my carbed 5.0 for 5 years now and it works very well. You just need to be sure to install a "T" in the line for the return back to the tank. Carbdford.com has a lot of info. check it out.
Click to expand...

Ya know i never really thought about running a return line...that just might be safe. Do you run the regulator after the T i assume? What brand regulator do you use and where did you run the return line to?
 
You must log in or register to reply here.

Similar threads

H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
M
87 wire tuck gone wrong
  • Mythstery
  • Nov 14, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
0
Views
212
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Nov 14, 2025
Mythstery
M
S
Block questions
  • s_vargas54
  • Jan 25, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
21
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Feb 8, 2026
Trogdor
A
need help and advise
  • amps1956
  • Oct 14, 2025
  • Other Auto Tech
Replies
16
Views
947
Other Auto Tech Oct 21, 2025
Mcmahst
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?