EFI reflash????

[StngStr]

Anyone know where I can get my ECU reflashed for 4.10 gears here in central florida? I called Ford and they say they can't go higher than 3.73's. I don't want a chip, too much $$ right now, and I don't want to mess with a Speedcal.

Thanks.

 

[BullittPlaya]

in florida, just tell your dealer to stop being a bunch of wimps and do it, if not take your business elsewhere. Or just get a speedcal, and get your local speedshop to install it. I have one, and abott era to be exact

 

[mrvax]

Anyone know where I can get my ECU reflashed for 4.10 gears here in central florida? I called Ford and they say they can't go higher than 3.73's. I don't want a chip, too much $$ right now, and I don't want to mess with a Speedcal.

Thanks.

Can you Fed Ex them back and forth to Georgia? Call T&J Performance or PM Cobra Killer.

 

[BullittPlaya]

yup, go with what mrvax said, that guy cobrakiller does some good work

 

[StngStr]

I can't send it to Tim, cause it's my daily driver and i work 2 jobs. So, I need it every day. I'd rather not get a speedcal, because I don't want to have to splice into any wires, and some people have problems with them. Plus, a Speedcal costs just as much as a reflash from T&J. That's why I was wondering if there is someone like T&J here in central florida.

 

[Darrin]

Go to LaMotta Performance 415 North 17-92 in longwood. Jake is a kick butt guy when it comes to Mustangs. He did my Vortech install, Dyno tune, and gear change for me and I haven't had so much as a hiccup in the performance. Tell him Darrin Harrelson referred you.

 

[StngStr]

too much money for a chip or dyno tune.

 

[awwyea]

I don't know how close you are to Clearwater, but Tony who owns Need For Speed would be able to help you. Check out his website at Need-4-Speed.com. He's so good, I drive down from MA to have him work on my car!!!

 

[DeadLurker]

in florida, just tell your dealer to stop being a bunch of wimps and do it, if not take your business elsewhere.

I wouldnt' trust my ford dealership to play with stuff like that. I tried that and learned the hard way.

 

[gottabfordtough]

I'd rather not get a speedcal, because I don't want to have to splice into any wires,.

i just installed my speedo calibrator, last night. there aren't any splicing, you don't even have to cut one wire, just release a couple of wires from one connector and plug them into the new one. very simple and easy.