• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

EGR Spacer Leaking

  • Thread starter Thread starter 93 LX
  • Start date Start date Jan 12, 2006

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 12, 2006
#1
  • Jan 12, 2006
  • #1
I have a 93 Stang and since I have owned this car the damn TB / EGR spacer gasket leaks.

I have replaced the gasket several times. The last time I figured there must be something wrong with the sealing surfaces. I took a straight edge and sure enough there is a gap which I fixed using my file. I checked the TB but it is very flat. I also desiced that if i use a soft metal and some RTV I may reduce any other inperfections on the sealing surfaces. In this case I used some lead I had laying around. It has worked for several years but once again its leaking. I noticed that the lead was deformed when I removed it, like there was excessive pressure inside the spacer. I also noticed that the TB studs had work them selves loose and are very rusty. I am going to replace the studs with stainless ones but I am not sure what to do about the EGR spacer.

Should I replace the spacer, should I use copper for the gasket and keep my current spacer, should I remove the water from the spacer?

Any other ides?

Thanks

Allen
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Jan 12, 2006
#2
  • Jan 12, 2006
  • #2
You can simply block off the coolant hoses to permanently fix it, or upgrade to a larger throttle body and spacer....
 

93 LX

Founding Member
Jun 2, 2000
3,081
3
0
Norwalk, CA.
Jan 12, 2006
#3
  • Jan 12, 2006
  • #3
Will blocking off the coolant cause any problems with the motor? It is stock and I dont want tobe broken down on my weekly travels.

Allen
 
S

ss93cobra

Founding Member
Apr 10, 2002
1,422
1
0
Wilmington NC
Jan 12, 2006
#4
  • Jan 12, 2006
  • #4
No. All that is designed to do is to help cool the incoming air. Lots of people have blocked the hoses off with no issues.
 

Mavrick

Founding Member
Aug 29, 2002
2,264
0
46
Collingwood, ON
Jan 12, 2006
#5
  • Jan 12, 2006
  • #5
I would use some RTV or the like, and see how that goes. Atleast its an easy 20 minute job!

If your running all your smog equipment, i wouldn't "just block off" the EGR spacer.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Jan 12, 2006
#6
  • Jan 12, 2006
  • #6
If your egr system is still intact, then blocking the coolant flow to the spacer is not a good option. The exhaust gas entering the intake is quite warm if not cooled.

I would suspect that the latest problem with the leak was due simply to the bolts/studs backing out. I would try thread locker, and a thin layer of rtv on all mating surfaces.

Those are my thoughts.

best of luck
jason
 
You must log in or register to reply here.

Similar threads

N
Need stainless carb heat shield
  • newmex999
  • Aug 29, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
2
Views
204
1965 - 1973 Classic Mustangs -General/Talk- Sep 13, 2026
Mcmahst
Engine EGR spacer for explorer 65mm TB?
  • 91GTstroked
  • Dec 31, 2024
  • Fox 5.0 Mustang Tech
Replies
1
Views
483
Fox 5.0 Mustang Tech Dec 31, 2024
Noobz347
A
Resolved 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
  • 2
Replies
36
Views
1K
Classic Mustang Specific Tech Nov 1, 2026
manicmechanic007
Engine Sick of stock TB and EGR spacer...
  • 91GTstroked
  • Dec 15, 2024
  • Fox 5.0 Mustang Tech
Replies
6
Views
825
Fox 5.0 Mustang Tech Dec 19, 2024
General karthief
9
Engine Donor '00 Mountaineer meet '91 Fox
  • 91firecracker
  • May 11, 2026
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
41
Views
1K
Fox 5.0 Mustang Tech May 28, 2026
91firecracker
9
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?