Eibach Sportline Springs

mali1966

New Member

Apr 12, 2005

21

0

0

Champaign ,IL

Apr 12, 2005

#1

• Apr 12, 2005

• #1

Hey guys , was looking for some help on a set up for my 03' Cobra. I want to upgrade my springs to Eibach's Sportline series. My question is do they make a set for the IRS rear ? Also has anyone installed springs of this kind , and does it mess up your steering geometry ?


Thanks for any info ...

 

missouri_guy197

New Member

Aug 31, 2002

1,441

1

0

St. Louis, MO

Apr 12, 2005

#2

• Apr 12, 2005

• #2

Yep they make them for the IRS, and you'll probably need C/C plates for the front to be able to align it properly since they drop the car 1.5-1.7"...Anything over 1.5" generally needs C/C plates...

 

C

chrisbudl1

New Member

Dec 21, 2003

436

0

0

springfield MO

Apr 13, 2005

#3

• Apr 13, 2005

• #3

I used H&R SS springs on my 97 and had to get the c.c. plates, balljoints, and bumpsteer kit, to get everything right. It can add up fast, especially if you don't do it yourself. Make sure and research it before you go too low. If you do the bumpsteer after getting it aligned, plan on getting it aligned again. Good luck

 

K

kstang69

New Member

Aug 14, 2003

153

0

0

atlanta, georgia

Apr 14, 2005

#4

• Apr 14, 2005

• #4

the pro-kit wont give you many of these problems

 

1

1268

New Member

Aug 19, 2004

168

0

0

Apr 14, 2005

#5

• Apr 14, 2005

• #5

I may have a used Pro-Kit for you within a week or two.........