• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electric Fan 101: Push Through Straps Warning

  • Thread starter Thread starter Strype
  • Start date Start date Mar 12, 2007

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Mar 12, 2007
#1
  • Mar 12, 2007
  • #1
When you put an electric fan on your radiator, make sure you don't use the black plastic pull through ties. Over time they can cut their way through your radiator and cause a big leak and a bad temperature spike. Just food for thought. My friend and I have both had this happen. It almost cost me another radiator but luckily it was waranteed at Advance. It could have cost me my motor. My fan is much larger and the straps cut through the radiator more quickly (6 months) than my friends because he had smaller Autozone fan:

Not mine but this is what I'm talking about:





Instead, use aluminum strapping. You can buy it at Home Depot and hack through it with a hack saw in a matter of seconds. Just cut, drill and attach to the top/bottom of the radiator.


Here's my top straps:


 

Attachments

  • InstalledFan-hi.webp
    44 KB · Views: 173
  • fan.webp
    38.7 KB · Views: 214

85_SS_302_Coupe

it sucks (I know) to be on the receiving end
15 Year Member
Nov 11, 2003
6,945
1,598
223
Northern KY
Mar 12, 2007
#2
  • Mar 12, 2007
  • #2
Yeah i've often wondered about that happening but so far so good for me. I'll probably look into the straps though, nice tip. I love any excuse to go to the hardware store
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 12, 2007
#3
  • Mar 12, 2007
  • #3
This is what you want for fan brackets...

Notice the custom PVC pipe overflow bottle.





 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Mar 12, 2007
#4
  • Mar 12, 2007
  • #4
Is you're real name "MacGyver"



Looks great
 

Darkwriter77

Resident Ranting Negative Nancy
5 Year Member
Jul 1, 2005
315
283
134
Apache Junction, AZ
Mar 12, 2007
#5
  • Mar 12, 2007
  • #5
That, my friend, is da ****zle!

I probably need to get adventurous (and responsible) sometime this summer and ditch my poke-through plastic fasteners, too, before I wind up killing my 3-core. Sure, I've got the same Autozone warranty n' all that, but I just don't wanna end up on a roadside with coolant everywhere, especially when temps this year are going to be over 120* in the summer...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 12, 2007
#6
  • Mar 12, 2007
  • #6
Joe, I'm LOVIN the overflow idea.

Can you think of a way to have a site glass or something along those lines? It might be too Rube Goldbergish to drill a couple holes in the side of the PVC and run a clear section of tubing external to the housing.......... but that was the best way I can think of.

What's your lid situation like? I would like to mimic your idea on the space impaired '94.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 12, 2007
#7
  • Mar 12, 2007
  • #7
HISSIN50 said:
Joe, I'm LOVIN the overflow idea.

Can you think of a way to have a site glass or something along those lines? It might be too Rube Goldbergish to drill a couple holes in the side of the PVC and run a clear section of tubing external to the housing.......... but that was the best way I can think of.

What's your lid situation like? I would like to mimic your idea on the space impaired '94.
Click to expand...

I have considered that, and it would be a good idea. The stopper or cap for the PVC is a regular PVC plug with a wing nut on it. Tighten the wing nut and you have your cap.

 

Attachments

  • Overflow & Vent Tube For Overflow Reservoir.gif
    18.8 KB · Views: 364

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 12, 2007
#8
  • Mar 12, 2007
  • #8
Excellent diagram.
Thank you for the lid info too.

I'll try to tackle this in the next week or so.
 

rd

Founding Member
Jan 12, 2000
3,316
63
109
Ocean Springs MS
Mar 12, 2007
#9
  • Mar 12, 2007
  • #9
Yes, the plastic fan and cooler mounting straps will put holes in the radiator. Been there, done that, got the t-shirt.

I have used lots of straps and brackets since then, including the 3 wire tie system on my 82. It's held the fan for 4 years now. Easy to remove and reinstall, with cutting pliers.
 

302RollinHard

New Member
Sep 26, 2005
0
0
0
Columbus, OH
Mar 13, 2007
#10
  • Mar 13, 2007
  • #10
Have to say thanks for the heads up strype. I bracketed mine due to this thread so that I didn't fall victim to a leaky radiator. I used pretty stout aluminum bar stock and heated/bent it to fit. Works well and the fan ain't movin an inch.
 

Dean85GT

New Member
Nov 27, 2004
502
1
0
Thorold, Ontario, Canada
Mar 13, 2007
#11
  • Mar 13, 2007
  • #11
I just used two regular zip ties on the bottom of mine and it is fine..
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Mar 13, 2007
#12
  • Mar 13, 2007
  • #12
Strype said:
Not mine but this is what I'm talking aboUT
Click to expand...

yea right you know thats your little crappy fan.
 

BK_CAULEY

it's built for speed not longevity, woman
Dec 26, 2006
0
10
49
Thomasville, ga
Mar 13, 2007
#13
  • Mar 13, 2007
  • #13
DOUBLE TIME
 

onefstsnake

New Member
Nov 25, 2005
792
1
0
Northern VA
Mar 13, 2007
#14
  • Mar 13, 2007
  • #14
As long as you have the fan bolted to the top of the radiator like the stock shroud then the pull through ties are fine.

All the weight of the fan cant be supported by just the fins...

I use the pull through ties just to keep the fan from hitting the pulleys.
 

Strype

Cuthbert catcher
Founding Member
May 11, 1999
61
34
104
Huntsvegas, AL
Mar 13, 2007
#15
  • Mar 13, 2007
  • #15
onefstsnake said:
As long as you have the fan bolted to the top of the radiator like the stock shroud then the pull through ties are fine.

All the weight of the fan cant be supported by just the fins...

I use the pull through ties just to keep the fan from hitting the pulleys.
Click to expand...

That's exactly how I had it... So I put 2 more aluminum pieces at the bottom. No they suck.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 16, 2007
#16
  • Mar 16, 2007
  • #16
HISSIN50 said:
I would like to mimic your idea on the space impaired '94.
Click to expand...

I took Joe's great idea and bastardized it a bit to accomodate the space I have available.
I was able to accomodate the low level sensor which is nice because of the very limited volume in this new bottle (mine, not Joe's).

FWIW, the stock 94-95 bottle holds 7 cups (cold coolant full mark) and 9 cups (hot coolant full mark). I'm going to be lucky if I can hold a quart in the new overflow, which concerns me a little bit. We will have to wait and see how it goes.

This will fit down to the side of the radiator on the 94, whereas the stocker sits in front of the cooling fan, which is almost touching the water pump pulley. It will be really nice if this actually works.

This isn't finished yet, so overlook the unpainted top edge, etc. If anyone sees any flaws or has constructive criticism, I'm all ears.


 

GSXRMIXXER

New Member
Feb 13, 2006
97
0
0
Mar 16, 2007
#17
  • Mar 16, 2007
  • #17
jrichker said:
This is what you want for fan brackets...

Notice the custom PVC pipe overflow bottle.





Click to expand...

i dont see anything?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 16, 2007
#18
  • Mar 16, 2007
  • #18
JR's site hosting seems to have been acting up lately. It comes and goes I think. I tried to compare what I did to Joe's stuff earlier but couldn't.
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Mar 16, 2007
#19
  • Mar 16, 2007
  • #19
HISSIN50 said:
JR's site hosting seems to have been acting up lately. It comes and goes I think. I tried to compare what I did to Joe's stuff earlier but couldn't.
Click to expand...

The guy running the photo posting site is evidently a Russian, since the site is available in Russian and English. I think he may have slipped and fell on his vodka bottle...
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 17, 2007
#20
  • Mar 17, 2007
  • #20
jrichker said:
The guy running the photo posting site is evidently a Russian, since the site is available in Russian and English. I think he may have slipped and fell on his vodka bottle...
Click to expand...



I think St Patrick's Day can be a week-long celebration in some parts
The less Irish one is, the more celebrating and making-up for lost years one must do.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
503
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
754
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
4K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
SOLD SOLD!!!! 1993 Notchback Roadracer For Sale. She's a beast!
  • Boydster
  • Apr 25, 2025
  • Fox Body Mustangs For Sale (1979-93)
Replies
0
Views
1K
Fox Body Mustangs For Sale (1979-93) Apr 25, 2025
Boydster
Engine 302 production block selection
  • FastDriver
  • May 19, 2024
  • Fox 5.0 Mustang Tech
  • 2 3
Replies
48
Views
8K
Fox 5.0 Mustang Tech Jul 1, 2025
FastDriver
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?