engine build

Why use 1.7 ratio rockers? Have you considered buying the right camshaft instead?

Not the parts I would choose but I would get a custom cam for the parts you are using. No experience with how the ports are on the rpm2, but may wanna be sure they line up with the afr185s, if not, may need to do some port work on the lower. Why the 30s? May need some a tad larger, I use 30s on my 306, depends on how much power you plan to make though. Why the low compression? Understand if maybe a power adder later, but if staying na, go for 10 to 1 or so. With a tune, np on the premium pump gas. If its a dd, can understand keeping it low as well for saving on some gas. Also, be sure the stall you use matches the cam choice, check with your cam builder.

Once its all said and done, you should have a fun street car there with alot of torque. You will need some better bushings on your stock control arms, or some better arms.