engine rebuild

stykthyn · Jan 17, 2011

Dart block with a boosted 331 or 347 will do that all day long.

2fast4u770 · Jan 17, 2011

dart block? what is that and where do i find that at

Shaolin Crane · Jan 17, 2011

stykthyn said:
Dart block with a boosted 331 or 347 will do that all day long.

ohiseewhatyoudidthar...
And they call me an ass lol

fiveohwblow · Jan 17, 2011

stykthyn · Jan 17, 2011

decided I could take the heat for a while

Shaolin Crane · Jan 17, 2011

stykthyn said:
decided I could take the heat for a while

prick lol

stykthyn · Jan 17, 2011

Seriously though, dart 347 with an on3 kit will easily exceed 500hp. You could do it on a stock block but then we'll see a post that says my 347 is now a flower planter.

NIKwoaC · Jan 17, 2011

I'm just spit-balling here, but I'm guessing you're new to this, based on how you didn't know what a Dart block was...?

1bad67sbf · Jan 17, 2011

400-500hp is alot of power so i would look at supercharger kits or turbo. get good flowing heads and a cam that fits a boost motor. keep you CR down

Shaolin Crane · Jan 17, 2011

NikwoaC said:
I'm just spit-balling here, but I'm guessing you're new to this, based on how you didn't know what a Dart block was...?

Newbs

They are all talking about using the stock block from an early dodge dart, they are a direct swap and will handle 1000hp before breaking...

1bad67sbf · Jan 17, 2011

Shaolin Crane said:
Newbs

They are all talking about using the stock block from an early dodge dart, they are a direct swap and will handle 1000hp before breaking...

Boosted92LX · Jan 17, 2011

1bad67sbf said:
400-500hp is alot of power so i would look at supercharger kits or turbo. get good flowing heads and a cam that fits a boost motor. keep you CR down

?????????? seriously? I know a guy with an autox car who makes well over 400hp with an n/a 306..... I allways thought turbos were for when you wanted to make 700+hp.

1bad67sbf · Jan 17, 2011

most supercharged mustangs have give or take 375-450 hp. 500hp is one bad mutha. most fast 03-04 cobras are in the high 400's or into the 500 mark

1bad67sbf · Jan 17, 2011

im talking about rwhp

Boosted92LX · Jan 17, 2011

hmm. yeah, ok. I really quit trying for big horse power out of 302's about 20 years ago when I got my first 351w fox. (357) it made around 425 with no juice. Not saying 302's are bad!!! I just got into the displacement thing and thought, crap why waste time! Still scratch my head when someone is jazzed over a 400hp supercharged engine....no such thing as a 347 back then!.. or a 408hehe!

1bad67sbf · Jan 17, 2011

400 rwhp is a fox body will surprise you

Boosted92LX · Jan 17, 2011

1bad67sbf said:
400 rwhp is a fox body will surprise you

It surprised a lot of people in 1991. infact it surprised enough people it payed for the car. That was before street racing was frowned upon and you just got a ticket to show off to your buddies.

Shaolin Crane · Jan 17, 2011

450rwhp in a 2900lb with driver fox will scare you

Boosted92LX · Jan 17, 2011

Shaolin Crane said:
450rwhp in a 2900lb with driver fox will scare you

I had a hundred shot, well a 300, but only gave it a hundred. A guy I kinda knew stopped at a red light next to me one day on his 750 katana. and I had my m&h racemaster slicks on that day. I sprayed it out of the hole. he about **** when I did a wheel stand and ran off and left him. That car ALWAYS tried to swap ends. it was like a never ending power slide. lots of fun. when we stopped at the next light he flipped his visor up and yelled "what the **** you got in that thing? LOL!!! When I put it up for sale his brother bought it!!!

JJ95GTID · Jan 17, 2011

Shaolin Crane said:
The 347 will run just fine with the stock EEC, many local guys are doing it no problem. "Technically" no stroker kit is a 347, its a 342 with a STD piston, 346 with a .030 piston and a 348 with a .040 piston

Must be a 94-95 thing then. The EEC are load based with calculations based on displacement.

engine rebuild

I want to measure mine. It doesn't look that tall.

Active Member

Banned

Official Member

I want to measure mine. It doesn't look that tall.

Banned

I want to measure mine. It doesn't look that tall.

中國製造

Active Member

Banned

Active Member

It's only an inch or two. What's the big deal?

Active Member

Active Member

It's only an inch or two. What's the big deal?

Active Member

It's only an inch or two. What's the big deal?

Banned

It's only an inch or two. What's the big deal?

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency