not a problem MikeROD like you said you learn something everyday you know...Im goin to leave the set up like it is cause the head has 2.08 intake valves and I didnt want to do what the guy said but Im gonna see what happens when I get the cam back....and plus I gotta get my CPU programed cause its still at the stock setting rite now and it wont let me go pass the stock rev limiter so rite now Im short shifting the engine....when it hits the rev limiter it trying to pull pass it so once I get that done we will really see whats whats....
engine swap stock to 306
- Thread starter hrdroc
- Start date
25thmustang
Mustang Master
WAIT one second. I have been around Mustang racing for some time now... Let me add up everything in this post.
You have an unkown block, bored to 306 CI. AFR 205s (ported as you claim), Spyder intake, 75mm TB, 80 MAF, 24 lb injectors, X cam, and a shot. No mention of tranny, rear, chassis etc... You say Drag Radials it went, 6.11 @ 109?
Also I notice you said it WANTS to be shifted at 7900, but you launch at 6500 and shifted at 6800. Later on you claim stock rev limiter which is 6250.
SOOO... what is it? A mismtached, short shifted, unkown, drag radial car running 9 second passes, or an intricate lie to get Stangnet guys swinging from your e-nuts?
Nothing seems to add up at all and thats from someone sitting about 30 feet from a low 10s high 9s car built here, with a few more trick parts than that.
You have an unkown block, bored to 306 CI. AFR 205s (ported as you claim), Spyder intake, 75mm TB, 80 MAF, 24 lb injectors, X cam, and a shot. No mention of tranny, rear, chassis etc... You say Drag Radials it went, 6.11 @ 109?
Also I notice you said it WANTS to be shifted at 7900, but you launch at 6500 and shifted at 6800. Later on you claim stock rev limiter which is 6250.
SOOO... what is it? A mismtached, short shifted, unkown, drag radial car running 9 second passes, or an intricate lie to get Stangnet guys swinging from your e-nuts?
Nothing seems to add up at all and thats from someone sitting about 30 feet from a low 10s high 9s car built here, with a few more trick parts than that.
blackened88lx
Active Member
/\ I was gonna say the same ****. An 1/8 good for 9s on 24lb injectors with a car that you know nothing about... 
EVERYTHING U READ IS TRUE BUT TO 25THMUSTANG AND BLACKENED88LX!!!!!! THIS ENGINE WAS BOUGHT AS IT SITS NOW. I PUT IT IN MY CAR AND I HAVE DONE NOTHING TO IT.I BOUGHT CAR THIS BONE STOCK AND THE CPU IN HAS BEEN JACKED UP SINCE I HAD IT.SOMETIMES U CAN GO OUT AND START THE DAMN THING UP AND STOMP IT TO THE FLOOR AND IT WILL FLY WIDE OPEN NO REV LIMITER OR NOTHING AND SOMETIMES IT KICKS IT.SO AS FOR U SAYIN THAT IM LYING U BOTH CAN GO WHERE THE SUN DONT SHINE OK THE TIMES I PUT ON HERE IS WHAT HE CAR RAN AND THATS THAT......IVE NEVER HAD THE CAR RAN IN 1/4 MILE TO SEE IF IT RUN'S 9'S SO PUT SOME GLASSES ON 1/8 MILE IS ALL IT'S BEEN...BUT U KNOW WHAT I KNOW WHAT I GOT AND I DONT HAVE TO EXPLAIN IT 2 YOU OR ANYBODY ELSE OKAY......
blackened88lx
Active Member
I'd just like to know a little bit more about the car because those are some impressive times. What's the drivetrain consist of? Tranny? Clutch? rearend? suspension? A 6.11 1/8 time is good for around 9.60s in the quarter.
Yes the car still has its stock rear suspension,tranny,rear end with 3.73 gears. That is all coming out now. A detroit locker,4.10 gears,31 spline moser axles,c-clip eliminators and moser rear end cover is goin in now.It already has a Centerforce dual friction clutch and a aluminum driveshaft.I dont know whats up wit this car it just wicket I mean the car is fast as ****.All I know is the motor was intended on having a supercharger put on it.
25thmustang
Mustang Master
Hmm mid 9s according to the 1/8th mile in a bone stock car with that motor, and some bolt ons...
Nope don't believe it. Not to mention you feel the computer was "jacked up" and sometimes the limiter works sometimes it doesn't. Where is that roll eyes smiley face...
But good luck lying to the rest of the board who will believe it, and have a nice day.
Nope don't believe it. Not to mention you feel the computer was "jacked up" and sometimes the limiter works sometimes it doesn't. Where is that roll eyes smiley face...
But good luck lying to the rest of the board who will believe it, and have a nice day
.
blackened88lx
Active Member
25thmustang
Mustang Master
On Drag Radials none the less...
Thats a record setting car right there. Something the pros can't do!
Thats a record setting car right there. Something the pros can't do!
Similar threads
