Equal or Unequal length BBK shorty headers?

T

Tasandmnm

New Member

Jun 1, 2007

19

0

0

Jun 7, 2007

#1

• Jun 7, 2007

• #1

The price difference between the two doesn't really concern me, I just want to know which will make more power and if either set will cause me any huge problems with access to the plugs, etc.

If you are going to tell me not to get BBK then please by all means tell me what to get....I would prefer it be something that I can pick up at Jeg's since they are local to me.

 

D

Deleted member 87397

Jun 7, 2007

#2

• Jun 7, 2007

• #2

You can't lose with either one as long as they are BBK. both have good access to the plugs, and the diff. in hp is negligible maybe 2 or 3 tops. Equal lengths look a bit cooler when installed and take about 20 minutes longer to install. If you go equal length, get a good set of plug wires with multi-angle boots.

 

T

Tasandmnm

New Member

Jun 1, 2007

19

0

0

Jun 7, 2007

#3

• Jun 7, 2007

• #3

Ah nice good to know. I think I may just go with the unequals then, they just look like they would be an easier fit and take up a bit less room overall.

 

89 FoxRod

New Member

Jun 5, 2007

2

0

0

Nebraska

Jun 7, 2007

#4

• Jun 7, 2007

• #4

Tasandmnm said:

Ah nice good to know. I think I may just go with the unequals then, they just look like they would be an easier fit and take up a bit less room overall.

Click to expand...

That's what I've done with mine. They were an easy install and I've been very happy with them.

 

fox-gt

Member

Feb 28, 2004

204

0

17

TN

Jun 7, 2007

#5

• Jun 7, 2007

• #5

With my unequals I had to get new motor mounts and dent them to clear the steering arm. The gaskets that come with them are crap IMO, get some good ones while you are there.

 

Busted07

I need my gorilla to be about an inch longer.

Nov 15, 2005

0

3

0

Jun 7, 2007

#6

• Jun 7, 2007

• #6

I dont know if they still make them or not, but whatever you do, stay away frm the single flange headers. Thats what i had, took them off and changed heads, and they wouldnt line up for crap!

 

jtfairlane

New Member

Mar 5, 2006

468

3

0

Jun 7, 2007

#7

• Jun 7, 2007

• #7

FBD said:

I dont know if they still make them or not, but whatever you do, stay away frm the single flange headers. Thats what i had, took them off and changed heads, and they wouldnt line up for crap!

Click to expand...

I hope what you are trying to mean is avoid the individual flange headers, and GO for the 1-piece flange design...

 

Busted07

I need my gorilla to be about an inch longer.

Nov 15, 2005

0

3

0

Jun 7, 2007

#8

• Jun 7, 2007

• #8

jtfairlane said:

I hope what you are trying to mean is avoid the individual flange headers, and GO for the 1-piece flange design...

Click to expand...

Yep, thats what i meant.... i spent 4 hours installing them with the motor out of the car.

 

U

UnderdogGN

New Member

May 7, 2006

74

0

0

Jun 7, 2007

#9

• Jun 7, 2007

• #9

i have the equal length bbk's...awesome! didnt have any trouble at all installing, just take the old out and in with the new. I dont have any problems with plugs or wires and they look cool too! my opinion...

 

grey5.0beast

Cookies should never be DUNKED!!!

Aug 3, 2004

0

1

0

atl ga

Jun 7, 2007

#10

• Jun 7, 2007

• #10

I'll let yall knowhow my install of summit brand headers goes soon.They were 140 and look nice!

 

Busted07

I need my gorilla to be about an inch longer.

Nov 15, 2005

0

3

0

Jun 8, 2007

#11

• Jun 8, 2007

• #11

grey5.0beast said:

I'll let yall knowhow my install of summit brand headers goes soon.They were 140 and look nice!

Click to expand...

You get longtubes or the shorties?

 

B

bandmc

New Member

Mar 20, 2007

29

0

0

Jun 8, 2007

#12

• Jun 8, 2007

• #12

I have BBK shorties. No complaints at all. Don't worry about gaskets, just use some good RTV. The flanges are insanely thick.

 

T

Tasandmnm

New Member

Jun 1, 2007

19

0

0

Jun 10, 2007

#13

• Jun 10, 2007

• #13

Well after going into Jeg's and inspecting the BBK shorties compared to the FRPP Stainless shorties I liked the quality of the Ford product better and bought a set of them. Plan to have em on the vehicle some time this week.

 

D

Deleted member 87397

Jun 11, 2007

#14

• Jun 11, 2007

• #14

The stainless ones are going to rust on you in a couple years. If you have the cash you might as well get polished ceramic coated. You'd have to go BBK though if you went that route, but they're top notch headers if you are worried about quality.

 

woodyy24

New Member

Mar 30, 2005

290

0

0

illinois

Jun 11, 2007

#15

• Jun 11, 2007

• #15

UNEQUALS!! i have the equal length shortys and the #4 plug is a PITA to get at.
other than that i love em.

 

C

C6AE

Member

Mar 22, 2004

145

1

17

Ma.

Jun 11, 2007

#16

• Jun 11, 2007

• #16

I have a set of equal one piece flange shorties on my Coupe. the head seal is fine (with copper gaskets) it's the Bassani X pipe to header seal that's driving me batty...
Guy at MU said BBK makes their stuff so that it doesn't fit well with other brands. Whether that's true or not...

 

D

dyingbreed24

New Member

May 4, 2007

0

0

0

Jun 12, 2007

#17

• Jun 12, 2007

• #17

i have a question. i have an 03 gt with prochamber catback and flow path mufflers i cant get longtubes because my car is lowered,so i'm going for some shorties to replace the stockers. but mac doesnt make shorties for their own prochamber. i was wonderin would bbk shorties fit the flanges if they are replacin the stockers. any help would greaty be appreciated.

 

D

dyingbreed24

New Member

May 4, 2007

0

0

0

Jun 12, 2007

#18

• Jun 12, 2007

• #18

and if not what shorties will fit

 

C

crumbie50

New Member

May 30, 2007

7

0

0

Jun 13, 2007

#19

• Jun 13, 2007

• #19

I hate to buck the trend, but I have the bbk 1 5/8" ceramic coated longtubes + hpipe. The longtubes weren't too bad to install and they sound amazing.