Estimate horsepower..

88GT460 · Nov 20, 2005

With mods below.

1994 Mustang GT

TFS Upper/Lower w/ Elbow
75mm BBK Throttle Body
BBK Cold Air Kit, Fenderwell
BBK 1 5/8 Shorty Headers
BBK H-Pipe (no cats)
Underdrive Pulleys
1.7 Rocker Rollers
Unknown mufflers (but seem to flow good)
4.30 Gears

MSD Coil (dont think that matters at all)

...

last 94 gt I owned had all the above with the exception of Holley Systemax and 3.55 gears. (it went 11.58 in the 1000ft, no quarter mile here)

-----------

I used a HP calculator from mustangworks.com and it estimated 260-270 with the following input.

13.5 quarter mile
86mph
3400lb car

I estimate from other peoples track runs that the difference between 1000ft and 1320ft is two seconds so that is where I got the 13.5

I estimated the car weight although I don't know how much a hard top weighs.

mytight95 · Nov 20, 2005

240 just to take a guess

jason

shelbe67 · Nov 20, 2005

not enough lol

Grn92LX · Nov 20, 2005

235-245rwhp. Depending on the condition of the valve springs, those rockers can hurt more than help. My friend had a similar set up in a 94GT and did 245rwhp.

urban96 · Nov 20, 2005

shelbe67 said:
not enough lol

88GT460 · Nov 20, 2005

Grn92LX said:
235-245rwhp. Depending on the condition of the valve springs, those rockers can hurt more than help. My friend had a similar set up in a 94GT and did 245rwhp.

alright, sounds good. Cannot wait till next year for the rest of the Trickflow Track Heat (360/370) kit. Hoping to make 320+ hp rwhp

Grn92LX · Nov 20, 2005

88GT460 said:
alright, sounds good. Cannot wait till next year for the rest of the Trickflow Track Heat (360/370) kit. Hoping to make 320+ hp rwhp

Talk to me when the time comes, i'll help set you up with something way better than the TFS kit. You already have the 4.30 gears. I'd do something like TFS heads, holley manifold, custom cam with valve springs, 6500-6800 rpm shifts. This will run harder than the tfs stage 1 kit.

94GTLaserRC · Nov 21, 2005

Grn92LX said:
235-245rwhp. Depending on the condition of the valve springs, those rockers can hurt more than help. My friend had a similar set up in a 94GT and did 245rwhp.

That's what I would guess, but I think with that 75mm TB, you're gonna get hurt a little on the HP until you get some more mods
RC

Black95GTS · Nov 21, 2005

grn92lx said:
Talk to me when the time comes, i'll help set you up with something way better than the TFS kit. You already have the 4.30 gears. I'd do something like TFS heads, holley manifold, custom cam with valve springs, 6500-6800 rpm shifts. This will run harder than the tfs stage 1 kit.

90mm race throttle body here you come!

94GTLaserRC said:
That's what I would guess, but I think with that 75mm TB, you're gonna get hurt a little on the HP until you get some more mods
RC

Oh snap, no you didn't!

In all seriousness, I'd go with a beefier cam. I'd have purchased a top end kit but I dont think the stage 1 cam will do it for me. I'm only going to do a cam swap once (supposedly) so I'd just as soon put in a hot one from the start and never look back.

adam

edit: on topic, 245-250 to the wheels with a good tune.

Blackened302 · Nov 21, 2005

260 + or - 15 is my guess

mytight95 · Nov 21, 2005

+ or - (-15) and he could have 270........ Lmao.....

j/k man......

jason

WHITE94COBRA · Nov 21, 2005

225hp and 285 tq, I personally dont think it will even go that high with stock unworked E7's. Sorry dude. if you get 240hp-300tq I would be extremely impressed.

xr8d302 · Nov 21, 2005

6 million horsepower, 8 gaJillion foot tonnes of torque

94GTLaserRC · Nov 21, 2005

I say 220, + or - 80
RC

88GT460 · Nov 21, 2005

WHITE94COBRA said:
225hp and 285 tq, I personally dont think it will even go that high with stock unworked E7's. Sorry dude. if you get 240hp-300tq I would be extremely impressed.

now that is a funny estimate.

Caldwell · Nov 21, 2005

7 horse.
6 ft/lbs torque.

Good luck out there stallion.

88GT460 · Nov 22, 2005

****, I just raced a tortoise and lost. I'm so doomed.

WHITE94COBRA · Nov 22, 2005

Did ya get the dyno pulls yet??? and hopefully,my prediction is a joke...

88GT460 said:
now that is a funny estimate.

88GT460 · Nov 22, 2005

WHITE94COBRA said:
Did ya get the dyno pulls yet??? and hopefully,my prediction is a joke...

nearest dyno is about a couple hours away.. maybe one day I'll go

94Blue302GT · Nov 22, 2005

About 250 with torque prolly around 315-330 range

Estimate horsepower..

New Member

Active Member

Member

Fidanza Man!

bubb rubb says:"woo woooooo"

New Member

Fidanza Man!

Squint as you approach, lest you be blinded by my

Active Member

Active Member

Active Member

New Member

I bought a 27" monitor to compensate for my lack o

Squint as you approach, lest you be blinded by my

New Member

New Member

New Member

New Member

New Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency