Felpro Cobra Intake Manifold Set

[pissedoff92]

I bought a felpro complete intake gasket set for my cobra intake swap. I see alot of guys using these specific part number gaskets and the gaskets with my kit werent the same? Are the ones I have okay to use? They are the right kit but I only want to do this thing once. I cant remember the part # everyone was saying they used but I know the kit I got is different.

 

[Gearbanger 101]

Are the ones I have okay to use? They are the right kit but I only want to do this thing once.

Pretty hard to give you an answer when you haven't given us any part numbers?

 

[TOOLOW91]

usually people have machine shops port match to felpro 1262 so they flow a bit better

 

[pissedoff92]

1262 sounds about right, I know for a fact that those didnt come in my gasket set. Are the regular felpro ones in the set fine to use? like I said I heard these part numbers through the grapevine on here thats why I dont know them.

 

[jsw81]

The 1262's are the larger port gaskets and the 1250's are the standard port intake to head gaskets. What heads do you have? I used 1262's with my twisted wedge 170's and probably should have used the 1250's....no issues so far though. I am going to run the Felpro 1250-s3 next though. They're the steel core version.

The 1262 is better for a bigger head like the TFS 185 or AFR 205's.

 

[pissedoff92]

As far as I know they are just factory E7's. Over winter Im purchasing a whole TF top end kit. So far I think I should be good with the gaskets I have I tottally forget to check the part number today, things always get crazy in the evening

 

[jsw81]

yeah you're fine with those gaskets

 

[pissedoff92]

Ok sorry guys for the long wait. But the part number in my gasket set is like a 95952? Ive never even heard of that on this forum. The part numbers for all the other gaskets in the set are similer and the kit does say for exploder/cobra mustang. Im nervous to use these?

 

[jsw81]

Yeah those are specifically for a full GT-40 setup, like explorer and cobra with the GT-40 heads. Here's a very informative post on those gaskets: http://forums.corral.net/forums/5-0...334-vs-gt40-ms95952-comparison-lots-pics.html

 

[pissedoff92]

Thanks a bunch man. good thing I ordered 1250's just in case.