Fender Badge Suggestions And Pics Please!!

[emot]

I saw this in an old Mustang Weekly article on Stray Bullitt.
I think it's from an 70's ford can't remember the model.

 

[emot]

Here's a couple more of the car. Not an 05 but nice none the less.

 

[05SatinSilver]

What did you do about the holes in the fender left by the original GT badges?

I have those same exact tri-bar emblems that I would like to put on, but I don't know what to do with the holes.

My new badges had 4 locating pins on them. I cut off the 2 side ones and the bottom one. I filed them flat and used the top pin into the top factory hole in the fender. This badge covers the other hole, no problems.


Dave...

 

[truetifoso]

My new badges had 4 locating pins on them. I cut off the 2 side ones and the bottom one. I filed them flat and used the top pin into the top factory hole in the fender. This badge covers the other hole, no problems.


Dave...

Thanks, Dave. Unfortunately, I don't think that my Tri-bar emblem will fit over the holes unless the holes are close together. Are they close together, or are they more towards the outer horizontal edges of the "GT" badge?

I appreciate your help.

 

[05SatinSilver]

Thanks, Dave. Unfortunately, I don't think that my Tri-bar emblem will fit over the holes unless the holes are close together. Are they close together, or are they more towards the outer horizontal edges of the "GT" badge?

I appreciate your help.

You will have no problems. I have a picture of the old GT emblem, but it's at home. So, I made this Crude drawing for you to see where the holes are.


Dave...

 

[truetifoso]

You will have no problems. I have a picture of the old GT emblem, but it's at home. So, I made this Crude drawing for you to see where the holes are.


Dave...

PERFECT!!!

I can't wait to get home and do this tonight. Is it hard to take off the GT emblem? Also, is there a specific kind of 3M tape that I need to use and are they readily available in hardware stores?

I really do appreciate your help, and I love the drawing. Very artistic.

 

[05SatinSilver]

Glad I could help out. I took mine off, by using a hair dryer. Heat the emblem then pry off slowly. I bought the 3m automotive tape at my local hardware store!
Post pictures when you done.

Dave...

 

[Szlachcic]

How about. http://www.alibaba.com/img/product/10/81/40/10814065.jpg

Whats even more sad is that I can actually see a stang with those exact badges from my dorm window.

 

[truetifoso]

Glad I could help out. I took mine off, by using a hair dryer. Heat the emblem then pry off slowly. I bought the 3m automotive tape at my local hardware store!
Post pictures when you done.

Dave...

You rule! Thanks.

 

[black04stang]

Think I will swap out the fender badges on this car. If anyone has a suggestion or better yet some pics I would appreciate it. I am looking for something TASTEFUL in other words the total OPPOSITE of those ridiculous looking 40th Anniversary Badges I have seen. Those are truly the worst badges I think I have EVER seen! PLEASE POST PICS!! THANKS!!

really? I like my 40th badges...to each is own...but damn....

 

[martimus]

really? I like my 40th badges...to each is own...but damn....

They're really cool badges (contrary to EXCON's opinion on the matter )!