Finally back to doing some Fox body custom work!

alanw6 · Jul 2, 2008

hsean said:
i will check out their website but your right it would be nice to get the bend in it but it would be difficult with the double din radio.

It's beyond difficult, there's simply not enough room (using the stock bend point).

Got one other shot that shows the surface finish a little better.

Ozz · Jul 2, 2008

Alan's work is completely in another league vs. that flat-stock piece with holes cut in it.

Did you see the "gauge cage" he made me? Compare that to Autometer's scrap of metal.

That last pic looks great. I will certainly have to step mine up!!

alanw6 · Jul 2, 2008

Dave, the parts aren't too different from a manufacturing standpoint. The ones I've shown start out as flat panels with holes cut in them, but I've chosen to bend mine. Nothing wrong with their part, but I feel a bent panel is indeed much more aesthetically pleasing.

Materials seem the same (ABS), but I'm going a different router here in regards to finish. If I really like the outcome, I can always do it in aluminum. Plastic just keeps the costs more realistic, of course.

1991vert · Jul 2, 2008

Nice work!

Ozz · Jul 2, 2008

alanw6 said:
Dave, the parts aren't too different from a manufacturing standpoint. The ones I've shown start out as flat panels with holes cut in them, but I've chosen to bend mine. Nothing wrong with their part, but I feel a bent panel is indeed much more aesthetically pleasing.

Materials seem the same (ABS), but I'm going a different router here in regards to finish. If I really like the outcome, I can always do it in aluminum. Plastic just keeps the costs more realistic, of course.

That's my point, that bend makes a night and day difference. Nothing wrong with the other at all but if I were to choose between the two it'd be an easy decision.

MuDDuQ · Jul 3, 2008

alanw6 said:
It's beyond difficult, there's simply not enough room (using the stock bend point).

Got one other shot that shows the surface finish a little better.

Its also a bunch of work cutting the hell outta your dash there is metal in dem dare woods so if you go flat panel double din you are there for life pretty much

YOUR PANEL IS LOOKING GOOD ALAN

MuDDuQ · Jul 3, 2008

You could double din your panel with the bend as you have it but the deck would have to go on the bottom and the heater controls on the top

alanw6 · Jul 3, 2008

MuDDuQ said:
You could double din your panel with the bend as you have it but the deck would have to go on the bottom and the heater controls on the top

This is true, however I think most people would prefer your setup with the radio relocated higher.

In my own fox, I have 2 DIN spaces taken up with a CD player and two 1/2 DIN signal processors. My HVAC controls are in the factory location.

Thanks for the props on my work so far. After a nice 4th of July weekend, I'll be ready to put some finishing touches on this panel and move on to my next project...

1990Coupe · Jul 3, 2008

Alan knows... I'm waiting for THIS project

View attachment 312385

hsean · Jul 4, 2008

MuDDuQ said:
Its also a bunch of work cutting the hell outta your dash there is metal in dem dare woods so if you go flat panel double din you are there for life pretty much

YOUR PANEL IS LOOKING GOOD ALAN

x2 that looks great i have an idea with mine and i am going to do some fabricating myself with plastic.

04sleeper · Jul 4, 2008

Nice work Alan!

Just made my plans for my annual trip to Tunica yesterday. I will give you a shout later.

Finally back to doing some Fox body custom work!

alanw6

Member

Ozz

I think I have a problem here.

alanw6

Member

1991vert

Ozz

I think I have a problem here.

MuDDuQ

Member

MuDDuQ

Member

alanw6

Member

1990Coupe

hsean

04sleeper

Similar threads

Finally back to doing some Fox body custom work!

Member

I think I have a problem here.

Member

I think I have a problem here.

Member

Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency