Firewall Clutch Adjuster Kit

[Red66GT]

I was wondering how hard would it be to install a firewall clutch adjuster kit? and would need to be done exaclty?

 

[forpit2000gt]

I was wondering how hard would it be to install a firewall clutch adjuster kit? and would need to be done exaclty?

http://www.maximummotorsports.com/instructions/MMCL-3r1.pdf

its easier to use someone elses writeup.

watch out for flying springs under the dash.

 

[CDHSTANG]

That is a good write-up I was wondering the same thing..

 

[hotdog71]

Takes about 1 hr to fit hole kit (steeda) cable, adjuster and quadrent.

 

[forpit2000gt]

I would get an adjuster and quadrant that uses the stock clutch cable. But a kit with cable is fine too.
I bought mine from UPR. The one in the writeup is Maximum Motorstorts. I haven't used Steada, but most everything they have is good, you will normally pay a little more for that name, not always.

 

[squares98]

stock cable>all

 

[YardSpecial]

MM is the best hands down.

Stock cable is the best to use.........

 

[hotdog71]

Stock cable is fine IMO if your not planning on putting in a preformance clutch. Otherwise you my want to think about changing it at the same time

Just my 2 cents worth.

 

[squares98]

The stock cable is perfectly acceptable for an aftermarket clutch, you only need to replace the stocker is if it snaps

 

[forpit2000gt]

the stock cable is better than most aftermarkets.

 

[showstopper2]

make sure you get a firewall adjustor with some kind of locking mechanism. most of the newer ones do in one way or another. I had a Forte's piece on my last car that would back itself off all the time making it damn near impossible to shift until I got out and tightened it up again.

anyone using the FIORE firewall adjustor? curious as to how good that locking system it uses really is...

 

[squares98]

I have had the UPR unit for a year with no complaints.

 

[hotdog71]

The steeda one seams good too.
You just have to put a drop of sealent on the head of the lock screw to keep it from vibrating out.