First Mods

Like stated above, you have to decide what you want from your car and what you are going to use it for. If you want just something a little quicker(300 flywheel hp) then Id suggest stuff like Exhaust, midpipe, and maybe longtube headers if you dont mind the loudness. Then you could go for some underdrive pulleys, and a timing adjuster. Follow that up with a new plenum and throttle body and you should be at or over 300 flywheel. Now if you want 300 rear wheel hp, then I would say skip everything except the exhaust and tb/plenum and go for a supercharger. Making 300 rwhp without a blower on these cars gets down right EXPENSIVE. The first thing I would do however is a set of Flowmaster 2 chambers and a Steeda Triax shifter. These two things make your car very fun to drive. Then get some 3.73 or 4.10 rear end gears. Good luck.

Full length sub-frame connectors.

It’s not a HP mod but IMO they are a must.
Same with a short throw shifter, if it’s a 5spd.

If you’re interested in just more horses right now I’d do more with the exhaust and at least get a mid-pipe, add a timing adjuster and some gears.

If you go cat-less with the mid-pipe you’ll need MIL’s and if you do gears, a speedo correction. So, I’d drop the timing adjuster and go with a tuner instead.

-Cale