First time using dr's ?'s need answering

gtrackd02

New Member

Aug 2, 2003

290

0

0

st clair shores

Mar 24, 2004

#1

• Mar 24, 2004

• #1

Ok sorry to ask these questions,

but I am going to have DR's when i got to the track saturday
They are BFG dr's 275/40/17 they'll be on the stock bullit wheels.
So I've never driven on them before and also never launched on a sticky tire,
I was wondering if you guys could give me some advice..

What tire pressure will be good for them at the track?

What kind of rpm should, or could i launch at?
How much do i have to worry about the rear end giving out?

I know these are rookie questions, and often asked but I am just trying to get the best out of them...
Thanks......
P.S. How are they on the street also..?

 

M

mhissticobra

Member

Feb 12, 2004

61

0

6

Mar 24, 2004

#2

• Mar 24, 2004

• #2

I plan on getting same tires/size soon here so I would like to know as well.

 

C

cjames885spd

Founding Member

Jun 20, 2002

88

0

0

Kandiyohi, MN

Mar 24, 2004

#3

• Mar 24, 2004

• #3

There was excellent article in hotrod a while back about this. I believe they ran the same tires on a bone stock mustang GT. Use 15-20 psi tire pressure, launch at 4000 rpm, do a burout for 10-15 seconds to get them nice and sticky!! they took .2 -.3 off there 60ft! Good luck!!

-Cass

 

BanginStang97GT

Founding Member

Sep 9, 2001

1,025

0

0

Jersey

Mar 25, 2004

#4

• Mar 25, 2004

• #4

I run m/t et streets. I used to do a quick burnout for like 5 seconds in 2nd just so they would smoke and I would launch around 4g's. They would screech and hook. That took like .3 off my et's. I then figured out that a nice smoke show burnout for like 10 seconds would allow me to drop the hammer and 5g's and hook great. I run about 15psi in mine, but mine are tubed now. W/18 rims I ran a 14.91, with et streets and a good launch I ran a 14.58. Worth it if you ask me. Good luck, be easy on the rear it doesn't like to be shocked. I think you have a 5 speed so just take it up to 4g's and don't POP the clutch out, but get off it quick. Got it?

 

2k2fourpointsix

New Member

Apr 7, 2003

210

0

0

Quincy, MA

Mar 25, 2004

#5

• Mar 25, 2004

• #5

I only have about 10 runs with mine, but I found that a 3-5 second burn works best. At the track I go to they don't prep for street nite so I only launch at about 3K by just dropping the clutch and they hook right up. Start at 18 lbs. and work your way down to see what works. 15-16 worked well for mine. With some practice you can launch higher but you will probably need to slip the cluch some to prevent spinning them. They work good, and if they actually prepped the track at NED, they would work even better for me. Like anything else practice makes perfect

 

R

Roush21

New Member

Dec 31, 2003

348

0

0

Mar 25, 2004

#6

• Mar 25, 2004

• #6

I have the nittos not the BFG and i run them at 17psi. I definetly don't hook up from a 4K drop maybe around 3200 or so and they still spin a tad....you just have to test and tune and get the feel for them and your car. Good luck bud

 

gtrackd02

New Member

Aug 2, 2003

290

0

0

st clair shores

Mar 25, 2004

#7

• Mar 25, 2004

• #7

Thanks guys..... I'm just gonna try not to break anything!!!!
probably thinkin I'll launch at 2750-3000ish and give the clutch a quck slip, then hammer it...
I'll try the tires at 25psi to start then go down from there...
So thats my plan to start...We'll see what happens after that...
I know the sidewalls are'nt that big so I dont think it's going to hook like crazy or anything... but I cant wait none the less.. later!

 

White360RFnSwee

Founding Member

Nov 4, 2002

869

0

0

West Palm Beach FL

Mar 25, 2004

#8

• Mar 25, 2004

• #8

arent 275 BFGs too wide for a 17x8 rim?

 

gtrackd02

New Member

Aug 2, 2003

290

0

0

st clair shores

Mar 25, 2004

#9

• Mar 25, 2004

• #9

White360RFnSwee said:

arent 275 BFGs too wide for a 17x8 rim?

Click to expand...

well, they will fit... but the answer is yeah they are...

I'm getting some ultralite2's from steeda and they measure 17x9 so they'll be goin on those soon.. as for now I'm going to chance it...

I have a freind who's driving on 285's- or wait they might be 295's...lol
on a 17x8 cobra wheel..01cobra's have 17x8's stock right?
I always tell him he's dumb, but here i am...

 

984.6gt

Founding Member

Jul 10, 2002

2,806

0

46

Sugar Land

Mar 25, 2004

#10

• Mar 25, 2004

• #10

Heat them for 5-7 seconds, run them at 20psi or less, and slip the clucth, you do not drop the clucth on drag radials, they will just break loose. Just make a few runs and see what works, I cut 1.8-1.9 just slipping the clucth at 4k.

 

JLstang351

Founding Member

Jun 26, 2001

528

0

0

atl,ga

Mar 26, 2004

#11

• Mar 26, 2004

• #11

With my 315 nittos i didnt not drop a single tenth. I dont know if it was b/c there new or if the track was just to slick? I even tried launching at around 2500. I might be going to a better track tomorrow so ill try again there.