First Try at Fox VC Install...ALREADY Problem (nobody told me)

MysteryMachine

Active Member

Jun 21, 2003

1,835

2

39

Parkesburg, PA

May 21, 2005

#21

• May 21, 2005

• #21

94GTLaserRC said:

SEcond Problem - WHoever it was that posted that the nipple was too close to the TB was right. I had to put on the tubing to the filler neck, THEN put the intake back down. HOPEFULLY, I wont need to remove that hose.

Click to expand...

Wonder why you guys had that problem don't think mines that close. They came back from the shop fast. Can't wait to see pics. Even after all the problems you've had I'm sure in the end you'll see its all worth it. My polishing job looks like **** and it still looks 100x better under my hood with them

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 21, 2005

#22

• May 21, 2005

• #22

3:04...FINALLY got the Vortech and Alt on.
Went under the car to change the oil, and hook up the VOrtech oil lines and guess what???? The drain line is pinched under the Vortech...Gottas start 1/2 way over again (already had tightened the belt, etc. or depending on how you want to view it.

Im now NOT gonna finish, because my 9yo is at a party, and I promised the 8yo I would take her in the pool.

Looks like Im gonna have to "try" to finish tomorrow.
RC

 

94gts

Member

Jul 4, 2004

873

0

16

Carmel, New York

May 22, 2005

#23

• May 22, 2005

• #23

my fox vc's went on without a hitch yesterday.

actually, we did not know about the longer bolts needed. luckily, my freind was with me doing them and said its ok i got a couple 302's sitting in my garage. so, we walk over there and lukily they were all fox motors and had vc bolts

thanks George





also, as far as gaskets, get the steel/rubber ones from ford. they are expensive but will not leak and require no rtv.

 

94GTLaserRC

Squint as you approach, lest you be blinded by my

15 Year Member

May 7, 2002

11,178

13

89

Ernan Says "here it comes... dushbag"

May 22, 2005

#24

• May 22, 2005

• #24

94gts said:

also, as far as gaskets, get the steel/rubber ones from ford. they are expensive but will not leak and require no rtv.

Click to expand...

I have them on already...the original ones from 1994. They are "stuck" firmly in place....hopefully they are still good (I removed my original VC's twice before and reused them)

Have you run the car and had NO leaking yet?

As far as the bolts, it turns out that 1" x1/4" are the same ones we use to install our hurricane shutters, and I had a whole bag of them lying around
RC

 

J

jghood13

New Member

Oct 2, 2003

160

0

0

NY

May 22, 2005

#25

• May 22, 2005

• #25

94gts said:

thanks George

Click to expand...

your welcome

 

final5-0

Mustang Master

Apr 6, 2003

6,817

12

79

DFW Texas

May 22, 2005

#26

• May 22, 2005

• #26

See RC

I told you there would be nothing to it.

Your charger did make it a bit more difficult for you than my simple little na setup I guess.

Glad you got em on there!

Later
Grady