Five days ago I rebulid T5 tranny and now I have two problems

omarECD · Jan 29, 2004

isn't there a break in period after a tranny rebuild? i hope you werent hard on it

Slow5.0 · Jan 29, 2004

omarECD said:
isn't there a break in period after a tranny rebuild? i hope you werent hard on it

I launch hard onlu once after 100 miles

yellow5.0cobra · Jan 29, 2004

omarECD said:
isn't there a break in period after a tranny rebuild? i hope you werent hard on it

OFF TOPIC.

Do u hang by Francis Lewis?

mo_dingo · Jan 29, 2004

Well, if the engine vibrates with the clutch pedal pushed in, then the vibration is coming from your engine. With the pedal pushed in, the clutch is NOT ENGAGED!

The flywheel/pressure plate are the only things that still spin when the clutch pedal is pushed in.

Both the pressure plate and the flywheel have the 50oz imbalance to them. Meaning if you install the pressure plate or flywheel 180 degrees from where it was before, vibrations will occur.

It's the same as the driveshaft. The driveshaft is EXTERNALLY balanced, with weights on one side. Turning it 180 degrees will get the same vibrations. But since you get the vibrations with the pedal pushed in, it has to be the pressure plate/flywheel.
Scott

Slow5.0 · Jan 30, 2004

Here is what I find today , driver side long tube header hitting X-brace just little bit , tomorrow I ginna try put some washers under x-brace and see whats happening
And I install new hangers on H-pipe , nothing happening , have to be X-brace
I hope so

mo_dingo · Jan 30, 2004

Hmmmm. Hopefully that is your problem! Let us know!
Scott

Slow5.0 · Feb 1, 2004

Nope , yesterday I put washers under x-brace (take me 1 hour )and driver header doesn't touch any more x-brace but damn vibration is still there , Now I going take car back to guy who rebuild tranny

Slow5.0 · Feb 7, 2004

Yep , I find whats wrong or whats bad , harmonic balancer , today I change with new OEM from autozone and no vibrations with this one , now I gonna order performance balancer http://secure.50resto.com/product1.cfm?SID=1&Product_ID=1733 and change this one from autozone , what you guys think about this balance from 50resto.com
Anyway thank you ALL guys on help

Ernie

Five days ago I rebulid T5 tranny and now I have two problems

omarECD

New Member

Slow5.0

Active Member

yellow5.0cobra

mo_dingo

Slow5.0

Active Member

mo_dingo

Slow5.0

Active Member

Slow5.0

Active Member

Similar threads

Five days ago I rebulid T5 tranny and now I have two problems

New Member

Active Member

Active Member

Active Member

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency