• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Fluidyne Radiator/Black Magic electric fan HELP

  • Thread starter Thread starter MustangOwner
  • Start date Start date Mar 21, 2007
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Mar 21, 2007
#1
  • Mar 21, 2007
  • #1
Well its time to replace the radiator as its got a nice looking puddle under my car. What i want to do it go with a fluidyne radiator and the Flex-a-lite Black Magic electric fan. Anybody got this combo? Or any experience with the fan or radiator? My plans for this fall or maybe summer will be a kennebell supercharger. Anybody know what that Black Magic fan is good up to for HP. I want to hit the 425 range after heads and so on. Pretty easy installation. Happy with the product? I know people like the Mark fan, but thats not an option. And i will also be doing a 6G alt upgrade. So that will not be a problem. Thanks
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Mar 21, 2007
#2
  • Mar 21, 2007
  • #2
I've heard plenty bad things about the Black Magic. Heard a bunch of good ones too, but the negatives FAR outweighed the usual negatives you see for products. That could be due to sheer volume or it could be because they are very hit or miss.

Anyway, do to that fact, I flat out didn't even consider them. Can't take chances w/my car and I don't like doing work twice I ended up with a thin 94-95 fan which works very well and leaves room for my blower pulleys.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Mar 21, 2007
#3
  • Mar 21, 2007
  • #3
Well the thing with the Flex-a-lite black magic fan is that its a complete kit. Its got everything you need. Do you know what the problem with it was? When i put the aluminum heads on i def don't want to warp them with some stupid electric fan if thats the case
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Mar 21, 2007
#4
  • Mar 21, 2007
  • #4
It varied, stuff from the switches sucked to the fitment was bad, to it didn't cool enough or crapped out on the people. Check out Stangnet's reviews section, I know there used to be a lot for it in there.

All I needed to wire up my SN95 fan was...some wire. I put it to a hot lead and it runs whenever the car is running. No switch to forget about and leave off, no extra wire connections to worry about, etc. It's the only way I'd put an electric fan in my car, personally. Granted you could do the same with a Black Magic fan but that defeats the purpose of the whole kit being a kit
 

alanw6

Member
Dec 19, 2002
449
0
16
memphis, TN
Mar 21, 2007
#5
  • Mar 21, 2007
  • #5
I am not pleased with my Flex-a-lite Black Magic Extreme fan kit. The fan itself is fine, and cools the car. WHEN IT WORKS!

I've had three controllers fail on me in less than 300 miles. All voltages check properly with a digital mulitmeter, everything is carefully wired, terminated, and heat shrink-ed.

Now I'm waiting for the DC Controls controller. I'm going to retain the Black Magic fan for now, and see how it goes.

My radiator is similar to the fluidyne, but was made at a local shop. My car is a built motor, h/c/i/s-trim setup, with hp in the 430s. It should stay pretty cool, once I get it back on the road.
 
M

MustangOwner

Banned
Dec 13, 2006
160
0
0
Mar 21, 2007
#6
  • Mar 21, 2007
  • #6
Yeah, i really like the Black Magic 185 electric fan, it looks like a good setup. Whats up with the controller? Anybody know where the best deal is to get it? Thanks
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Mar 21, 2007
#7
  • Mar 21, 2007
  • #7
That's a whole 'nother can of worms
 
E

El_CUCUY

Member
May 1, 2006
95
0
6
RGV
Mar 21, 2007
#8
  • Mar 21, 2007
  • #8
mansonozz said:
I've heard plenty bad things about the Black Magic. Heard a bunch of good ones too, but the negatives FAR outweighed the usual negatives you see for products. That could be due to sheer volume or it could be because they are very hit or miss.

Anyway, do to that fact, I flat out didn't even consider them. Can't take chances w/my car and I don't like doing work twice I ended up with a thin 94-95 fan which works very well and leaves room for my blower pulleys.
Click to expand...

So you used an e-fan from a 94-95 ? Does it make a diff if its an v6 or a v8 the reason i ask is cause i need one bad and theres a few cars at my buddy's Auto Wrecker yard that are awaiting to get crushed and he lets me take what i want before they crush them..

Thank, Benny
 

alanw6

Member
Dec 19, 2002
449
0
16
memphis, TN
Mar 21, 2007
#9
  • Mar 21, 2007
  • #9
91FoxSaleenGTLX said:
Yeah, i really like the Black Magic 185 electric fan, it looks like a good setup. Whats up with the controller? Anybody know where the best deal is to get it? Thanks
Click to expand...

Bought mine through Summit.

Not sure what's up with the controller(s). Maybe it's just bad luck, but I also know I'm definitely not the only one to experience this failure. I've been in the electronics (including 12v) for over ten years, so I do have confidence the install is correct. If the DC Control box doesn't fix it, then I'm
 

Ozz

I think I have a problem here.
Founding Member
Jul 27, 2001
3,514
66
109
Canton, MI
Mar 22, 2007
#10
  • Mar 22, 2007
  • #10
El_CUCUY said:
So you used an e-fan from a 94-95 ? Does it make a diff if its an v6 or a v8 the reason i ask is cause i need one bad and theres a few cars at my buddy's Auto Wrecker yard that are awaiting to get crushed and he lets me take what i want before they crush them..

Thank, Benny
Click to expand...

No, they're the same. If you're putting it on a blower car then it's got to be from a 94-95 because of its thin profile. The 96+ is about twice as thick and will hit the blower belts.
 
E

El_CUCUY

Member
May 1, 2006
95
0
6
RGV
Mar 23, 2007
#11
  • Mar 23, 2007
  • #11
mansonozz said:
No, they're the same. If you're putting it on a blower car then it's got to be from a 94-95 because of its thin profile. The 96+ is about twice as thick and will hit the blower belts.
Click to expand...

Nah its not a blower car but i just need one that will cool it down ....We get some hot a$$ summers down here where i live and i can't have it getting hot on me...
I tried looking for a MARK 8 fan but i had no luck so if i can use the 94-95 fan i will
 
You must log in or register to reply here.

Similar threads

Engine Themostat
  • Mindseye007
  • Jan 30, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
21
Views
728
Fox 5.0 Mustang Tech Feb 1, 2026
86HO5.0
8
J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Engine HELP - 351W Based Build Under Stock Hood
  • thinkfaster
  • Oct 17, 2024
  • Fox 5.0 Mustang Tech
Replies
13
Views
2K
Fox 5.0 Mustang Tech Dec 31, 2025
Qtrhrse23
Q
Sn95 Stumped Electrical Tech
  • Jacobn4056.
  • Jan 16, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Jan 19, 2024
Jacobn4056.
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?