• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

FOCK ME (motor)

  • Thread starter Thread starter Mr. Rustypwnz
  • Start date Start date Jun 22, 2010

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 22, 2010
#1
  • Jun 22, 2010
  • #1
ite stangnet, lately ive been noticing that me car has been making popcorn on the decel.. didnt do that a couple of weeks ago.. i put new bassani's on it and still the same thing, well today i check the plugs (spray) and low and behold no# 6 looks like its hit some coolant, 7 is completely black with white on top, like it went rich and then immediately lean. 8 looks alright..

car will smoke a little on wot, but the smoke kind of lingers right in that spot and then dissolves.. if i spray it its fine no smoke, it has a kind of weird skip at idle, and on acceleration it kinda feels like a miss, not really smooth like it was..

is it possible to blow out a MLS head gasket? i mean i think it would take alot..

but the popping through the exhaust makes me think of a burnt valve.. idk, im gonna pull the motor tomorrow after work prolly and investigate..
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 22, 2010
#2
  • Jun 22, 2010
  • #2
damn i think it went really lean on spray, prolly damn fuel filter clogged on my ass.. or the pump..
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Jun 22, 2010
#3
  • Jun 22, 2010
  • #3
That sucks man.

Check your oil for coolant and your coolant for oil.

Other than that, maybe you just burnt up a plug and it was causing the rough running you're experiencing. Possibly it did lean out, but beat the plug up first... at least that'd be ideal.

What color is the smoke? White would indicate coolant, blue oil, and black fuel.

And you're spraying a 100 wet shot right?
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 22, 2010
#4
  • Jun 22, 2010
  • #4
yeah 100 wet shot, its more of a white color, none of the injectors are stuck, they all click. it hasnt been burning excessive amounts of oil either, the oil prolly needs to be changed, but it dosent smell like gas and is not thinned out.. no noticeable coolant loss either..

and i did change that plug out today, went out and leaned on the gas a bit and then made one 2nd gear spray, and it came back black with white on the tip, the thing is its like one side is darker, one side is almost white, its weird, it almost has to be a valve problem, because you can see the direction of the burnt gasses are going on the electrode... its really weird!!

ill get a pic of it here in a couple hours.. gotta get the camera charged.. oh well perfect time to slap on the ole C heads lol
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 23, 2010
#5
  • Jun 23, 2010
  • #5
well i was very wrong, i did a compression test and it came up 130psi stone cold, no oil added which is still a lil low, but the plug was fouled as well, so im gonna swap in some fresh oil friday and go easy on it..

there was oil residue on the plug unburnt, so its either a very leaky valve seal, or the rings, has just a hair of blow by, and i mean i can barely even feel it..
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Jun 24, 2010
#6
  • Jun 24, 2010
  • #6
Well that's better news.

I agree 130 is a little low, but generally that'll improve a little on a warm motor so I wouldn't sweat it too, too much.

Did you just do that one cylinder? I'd do the rest as well and see how the plugs are looking.

So was the plug fowled with oil or carbon? It doesn't sound like it's too lean.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 24, 2010
#7
  • Jun 24, 2010
  • #7
yeah its the rings on no 7, all the rest look perfect.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 24, 2010
#8
  • Jun 24, 2010
  • #8
going to get a teksid shortblock in the morn!!! **** load o compression here i come!!
 

BurningRubber

10 Year Member
Dec 6, 2004
1,865
24
58
Jun 25, 2010
#9
  • Jun 25, 2010
  • #9
Well that sucks, but at the same time you're upgrading, so... haha.

That compression bump and the nitrous will get along pretty well.
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jun 26, 2010
#10
  • Jun 26, 2010
  • #10
yep went and got it yesterday, and also i stripped down the car ready to yank the motor and trans, so it will be soon, it should be running by late tonight, or tomorrow sometime..

yeah i think the spray and all that compression, plus the alum block, this thing will haul serious ass!!
 
You must log in or register to reply here.

Similar threads

Buying with a bad motor?
  • djj62478
  • Mar 8, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
8
Views
498
1996 - 2004 SN95 Mustang -General/Talk- Mar 11, 2026
TTSaleen
E
Noise near blower motor behind dash?
  • Ethereal_Zer0
  • Dec 31, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
528
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 3, 2026
Ethereal_Zer0
E
N
Smoking problem 02 gt
  • Nightmare4.6
  • Oct 2, 2024
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
11
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 25, 2024
Manlaw213
M
SURGING IDLE / NO IDLE CHECKLIST FOR 1996–1998 MUSTANG GT (4.6L 2V) - Work In Progress
  • Noobz347
  • Aug 30, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
0
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Aug 30, 2025
Noobz347
S
Help with window and possible engine
  • StefRena22
  • Jun 12, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2025
Willybill32
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?