My drivers side fog light assembly is broken and I'm just wondering if anyone has had to replace theirs. I'm talking about the entire thing, mounting bracket underneath and all. I have a new one from 5.0 Resto and was just wondering how difficult the replacement is.
I replaced mine (just the lens and housing, not the entire bracket) myself last summer with some clear ones. The hole thing comes out real easily. I did it in 20 minutes.
EDIT: I hope you're not a vert. If so, you're gonna need to take out the 25lb weight in the passenger side fender behind the foglight to get to it. Luckily, I had already taken mine out when I did my foglights.
Doing entire assy is pretty tit....If I remember its (3) 12 or 13mm bolts that hold the bracket/light assy in place along with a tab that locates in the bumper...just unplug and remove the 3 bolts....I'd shoot the mothers with some PB blaster first...the bolts screw into those clip nut jobbies...don't wanna bust em...theres plenty of play to re-align the light in the center of the hole before you reef em down..