Ford letter cams

[uneverkno]

does the f-303 or x-303 require mods to the pistons for valve clearence? reason i ask i might be picking up a 93 gt this weekend if everything goes as planned, and im going to start ordering mods. :SNSign:

 

[venom97]

im sure the x does but i dont know much about the f cam, so im not sure about that one.

 

[1BADLXCOUPE]

the F-303 wont cause any clearence issue's and is a Great basic High performance cam----the X cam will cause piston to valve clearence problems on a stock engine----hope this answered your question-

korey

 

[maverick0716]

Just a word of advice. If you don't plan on changing much else but the cam, don't put in an F or X cam.....those are for cars with aftermarket heads/intake/exhaust/gears. If you put it in a stock engine, it will be a dog and give you no power....just worse gas mileage.

 

[Strype]

Just ask this guy I know who is cheap and has an X or F cam with stock heads and stock pistons and stock block and stock intake (need I continue)

 

[Notchbck93]

.535 lift is max.

I am at .534 and have .075 between the top of the piston and valve.

 

[IntenseBlue]

Just ask this guy I know who is cheap and has an X or F cam with stock heads and stock pistons and stock block and stock intake (need I continue)

Inform me.