• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-

Found some hard to find stuff at my local scrap yard

  • Thread starter Thread starter Roland69
  • Start date Start date Mar 29, 2006
  • 1
  • 2
Next
1 of 2 Next Last

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#1
  • Mar 29, 2006
  • #1
I went out to take a bunch of crap lying aroung the garage and took a walk over to the "Mustang section" I found a shifter boot and bezel in awsome condition handle knob and all. I seen another one with a sunroof so I went over to look at the weather stripping and it was in excellent condition so I took the inner trim seal and the seal the sunroof sits on (the one that costs about $140). I took the seals and complete shifter boot with the knob still on the handle up to pay for it and he said "don't worry about it" The pile of junk I gave him had two cats one from my truck and one from my dad's truck and he said he will get 35-40 bucks each for them so I said that's fair enough.

What should I do with this stuff should I keep it or stick them on ebay. The sunroof seal on my car is geting kinda rough but I dont know if I could change it without messin something up. My boot and bezel are in good shape but a few mounting tabs are broken off and the one I found today is perfect minus the one tab I broke taking it out
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Mar 29, 2006
#2
  • Mar 29, 2006
  • #2
The shifter bezel youre talking about, is it the upper plastic piece, or the lower one that bolts down with the rubber seal on it?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#3
  • Mar 29, 2006
  • #3
I got the upper plastic one but I have the other one in the garage with the rubber seal still on it.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Mar 29, 2006
#4
  • Mar 29, 2006
  • #4
Are you looking to part with that one?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#5
  • Mar 29, 2006
  • #5
I don't need it you want it. What 1 are you talking about the stock shifter base with the rubber seal with the spring that holds it on.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#6
  • Mar 29, 2006
  • #6
What else should I look for that is hard to find I am good friends with the guy who ownes this yard so parts are always cheep 4 me. I looked around today but couldn't rembember what people wanted that they couldn't find.
 
8

89white50

Member
Nov 16, 2004
440
1
18
central MA
Mar 29, 2006
#7
  • Mar 29, 2006
  • #7
how much do you ant for that upper seal?
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#8
  • Mar 29, 2006
  • #8
the shifter seal or the sunroof seal
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#9
  • Mar 29, 2006
  • #9
and nice car you got there
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#10
  • Mar 29, 2006
  • #10
Got some pics of the boot I think it's nicer than the one in my car.
[/IMG]
[/IMG]
[/IMG]
[/IMG]
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Mar 29, 2006
#11
  • Mar 29, 2006
  • #11
Hey. We have NO Mustangs around here in the junk yards. If you COULD, next time you go out there, look for the passanger side clip retainer that holds the hatch cover thing you pull down and hook to the rear and covers the hatch area. The ONLY thing broken on my car.. Here's a pic of what I'm looking for......


View attachment 480825
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#12
  • Mar 29, 2006
  • #12
Can do. I have them on my car still but I think I'll keep them lol. What if I can only find them red would you still want them you could paint them grey or black.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Mar 29, 2006
#13
  • Mar 29, 2006
  • #13
Grey is the most popular color... I wouldn't want to paint them because it'd never match the 15 year old finish on the rest of the panels and pieces ya know? I'll def. pay you for your time and effort!

Nick
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#14
  • Mar 29, 2006
  • #14
I'll look next time. I'll give you a PM before I go just incase you find some soon. would you just use paypal
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Mar 29, 2006
#15
  • Mar 29, 2006
  • #15
Yeah, paypal is the easiest and fastest.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#16
  • Mar 29, 2006
  • #16
you know what the car I took the shifter boot from had gray int and it was a hatchback I will stop by again monday and see if there still on the car most don't even have the canvas cover but we might luck out.
 

Roland69

Sergeant Tangnet
Sep 17, 2005
2,867
3
58
Port Elgin, Ontario
Mar 29, 2006
#17
  • Mar 29, 2006
  • #17
I'll use Foxfan as a reference I shipped him a boot and bezel a while back I even threw in a short handle shifter for nothing. I would use a faster shipping method this time his took almost 3 weeks.
 

stang8urimport

Autozone Junkie
Founding Member
Jun 21, 2002
1,499
12
59
Daytona Beach, FL
Mar 29, 2006
#18
  • Mar 29, 2006
  • #18
Yeah, probably USPS Parcel.. It takes forever... Just send Priority in their flat rate 3.65 envelope. I trust ya man.
 

Busted07

I need my gorilla to be about an inch longer.
Nov 15, 2005
0
3
0
Mar 30, 2006
#19
  • Mar 30, 2006
  • #19
Roland69 said:
I don't need it you want it. What 1 are you talking about the stock shifter base with the rubber seal with the spring that holds it on.
Click to expand...


I need the piece that slides over the shifter then bolts to the floow. i think its to keep the heat out. it is a rectagle/square looking jobbie, and has rubber in the middle to slide over the shifter handle and keep the heat out. it is usually goldish in color. its the one that is a pain in the ass to take the 2 forward bolts out (they are under the radio)
 

Mustang78

New Member
Feb 8, 2006
486
0
0
Aberdeen, WA
Mar 30, 2006
#20
  • Mar 30, 2006
  • #20
i need a 140mph speedo, justt he round pod if you can find it..i've chcked over 10 stangs with no luck, send me a PM if you see one, thanks

~Mark~
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

J
Progress Thread Family member 1989 GT- Backstory and updates
  • JRC99
  • Apr 19, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 26, 2025
JRC99
J
Progress Thread The Mach Returns - Update/build thread
  • squeak93
  • Feb 20, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
350
1996 - 2004 SN95 Mustang -General/Talk- Jun 1, 2026
squeak93
Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
46
Views
3K
1965 - 1973 Classic Mustangs -General/Talk- Jul 16, 2026
Noobz347
My 93 4v Fox
  • OffspringChaos
  • Aug 30, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
20
Views
4K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 10, 2024
bird_dog0347
Which one of these 3 intakes make the most sense for my 331 combo
  • from6to8
  • Jul 25, 2024
  • 1994 - 1995 Specific Tech
Replies
7
Views
2K
1994 - 1995 Specific Tech Jul 26, 2024
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?