front end noise

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Jun 14, 2007

#1

• Jun 14, 2007

• #1

my 91 is making noise up front only when turning the wheel moving really slow, crawling or stopped. when driving or moving along fine no noise. the noise is like crunching binding banging(best i can do).

this never did it until I put on the 17" wheels with the bigger 255/40 tires and they are stickier. maybe stressing something now? jacked it put a bar under the wheel no play in ball joint, side to side tight no play. tigh rods look good plenty of grease. struts arent that old. the car doesn't bang around over bumps either other the normal mustang ride. any thoughts.

 

fastford91

New Member

Aug 15, 2006

254

1

0

Niagara ,Ontario, Canada

Jun 14, 2007

#2

• Jun 14, 2007

• #2

id check if the tires are rubbing anywhere first ! which it sounds like you already have! next i would check the wheel bearings ! cause its only making the noise while going slow! when your moving fast your not hearing it because your going faster! there for they are spining faster and no noise is heard! if they get worse youll hear them at any speed! that would be my guess! lets us know how you make out and what the problem was! if this is not your problem im sure others will have some suggestions! James

 

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Jun 14, 2007

#3

• Jun 14, 2007

• #3

I'm starting to think to myself now maybe my lower control arm bushings maybe? I don't think wheel bearings, doesn't make that sound and I've had that happen to me plus it was some what not has noisy before.

 

fastford91

New Member

Aug 15, 2006

254

1

0

Niagara ,Ontario, Canada

Jun 14, 2007

#4

• Jun 14, 2007

• #4

ok cool!!! its your car and you know whats up ! could very well be what you think! i was trying to give you more ideas! James was just thinking i had a car that did ! that does it do it when you go over bumps? if it does could be the front stabilizers !!

 

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Jun 15, 2007

#5

• Jun 15, 2007

• #5

Thanks for the ideas, I'm going to pull the rotors and check the bearings also not a bad idea. It will make the noise if I'm not moving also at a dead stop cut the wheel left or right, that's why I thought more suspension. I put new stabilizer links on 3wks ago pas. side snapped off. maybe they need to be tighter? i pretty much cranked them on. I jacked both sides up full lock to lock no rub tires don't touch. I don't know how much is left under there to rule out. would the sway bar mounts themselves stress or make noise when truning the wheel while not moving and stress trying to turn this sticky tire?

The smaller tires and less grippier ones I had on before never gave me this, now these are wider and grippier and brought this out, maybe stressing a weak spot maybe not I don't know.

 

93 LX

Founding Member

Jun 2, 2000

3,081

3

0

Norwalk, CA.

Jun 15, 2007

#6

• Jun 15, 2007

• #6

if it does it only while turning then its ball joints.

Allen

 

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Jun 15, 2007

#7

• Jun 15, 2007

• #7

well if it the lower ball joints i should probally upgrade to the ffr lower arms then and take care of the bushings at the same time. thanks. I'll be broke soon lol.

 

93 LX

Founding Member

Jun 2, 2000

3,081

3

0

Norwalk, CA.

Jun 16, 2007

#8

• Jun 16, 2007

• #8

LOL well spending money on your stang is like spending money on your special person. The difference, your stang will always love you, with your special person that is not always the case! LOL

Allen

 

skunk21

Active Member

May 22, 2007

1,203

3

36

Taxachusetts

Jun 16, 2007

#9

• Jun 16, 2007

• #9

ahh so very true .