would the fuel cooler be plumbed into the feed or return line? most that I see have a -06AN inlet/outlet and seems like they'd be on the small side to be plumbed into the feed line. Does it matter if it's plumbed into the return? either way the fuel is going to get cooled.
the purpose for plumbing one in would be to cool my aeromotive pump without the use of a fuel controller, which controls the speed of the pump at various RPMS; ie: Aeromotive fuel controller.
thanks!
the purpose for plumbing one in would be to cool my aeromotive pump without the use of a fuel controller, which controls the speed of the pump at various RPMS; ie: Aeromotive fuel controller.
thanks!
wouldn't make much sense with a gravity fed pump.
