• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Fuel cooler

  • Thread starter Thread starter 1991vert
  • Start date Start date Nov 19, 2007

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Nov 19, 2007
#1
  • Nov 19, 2007
  • #1
would the fuel cooler be plumbed into the feed or return line? most that I see have a -06AN inlet/outlet and seems like they'd be on the small side to be plumbed into the feed line. Does it matter if it's plumbed into the return? either way the fuel is going to get cooled.

the purpose for plumbing one in would be to cool my aeromotive pump without the use of a fuel controller, which controls the speed of the pump at various RPMS; ie: Aeromotive fuel controller.

thanks!
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 19, 2007
#2
  • Nov 19, 2007
  • #2
your inlet if you put on your return you are cooling fuel that is giong back into warm fuel
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Nov 19, 2007
#3
  • Nov 19, 2007
  • #3
so do i want the fuel cooler between the tank and the pump? wouldn't make much sense with a gravity fed pump.

my thought was that it would continuously cycle through the cooler and the fuel in the tank would eventually end up at a cooler temp.? i just dont want my fuel pump to overheat
 

PUNISHER RACING

Active Member
Aug 27, 2007
1,124
0
36
FORD CITY, PA.
Nov 19, 2007
#4
  • Nov 19, 2007
  • #4
put it up it your y block where your fuel goes into the rails to be disperssed into engine.
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Nov 19, 2007
#5
  • Nov 19, 2007
  • #5
Well I would want the fuel cooler after the pump and before the regulator! If you cool the return line or the whole tank its just going to heat up while its going through the pump. The pump will cool more efficiently if you are only cooling the volume of fuel in the lines after the pump. Trying to cool all the fuel in the tank seems crazy.
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Nov 19, 2007
#6
  • Nov 19, 2007
  • #6
lol well i was thinking about cooling the pump so that's why i thought that.

so between the pump and the y-block is where i want it.

i've heard of people putting a trans cooler w/ fan in the return line and cooling it. i guess it couldn't hurt to do both?
 

ninety15.0

New Member
Mar 10, 2004
1,336
0
0
Nov 19, 2007
#7
  • Nov 19, 2007
  • #7
You are probably right. I didnt really think of having to cool the pump?? You are running a sumped tank with an external fuel pump IIRC? I think perhaps you should contact aeromotive and ask them if there is a need to keep the pump/fuel cool. I dont know enough about those setups to give you a good answer for the pump temps.
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Nov 19, 2007
#8
  • Nov 19, 2007
  • #8
ya the purpose is to cool the pump itself. i would rather not rely on their speed controller because there is the possibility for electronic failure
 

1991vert

10 Year Member
Feb 27, 2004
1,103
7
69
Ludlow, MA
Nov 20, 2007
#9
  • Nov 20, 2007
  • #9
shot an email to glenns performance and got a reply! they have my business
 
You must log in or register to reply here.

Similar threads

Fuel 87 5.0 Fuel rail lines
  • Mcmahst
  • Jan 21, 2025
  • Fox 5.0 Mustang Tech
Replies
15
Views
1K
Fox 5.0 Mustang Tech Feb 11, 2025
Mcmahst
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
486
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
H
Fuel starvation issues, 91 EFI to carb swap. Car dying after 1-3 gallons used. EFI tank, electric fuel pump, bypass regulator. Dual fed carb
  • hassler
  • Oct 11, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
8
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 12, 2025
nickyb
0
V6 to V8 Swap info
  • 02_2v_Curtis
  • Jan 11, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
2
Views
1K
1996 - 2004 SN95 Mustang -General/Talk- Oct 7, 2026
2v_johnny
2
B
'03 GT Fuel Pump/Pressure/Delivery Issue
  • Brodach
  • Oct 21, 2025
  • SN95 4.6L Mustang Tech
Replies
8
Views
1K
SN95 4.6L Mustang Tech Oct 31, 2025
gkomo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?