Full length sub-frame install help

[swl987]

Do you have to remove anything to install MM full length sub-frame connectors?thanks

 

[CobraRed_96_GT]

You know you have to weld them in, and while it's on a suspension load bearing lift - right?

 

[swl987]

You know you have to weld them in, and while it's on a suspension load bearing lift - right?

Yes, I know that. I want to know if you have to remove any parts to install them. exhaust,etc

 

[Rickyll7]

MM has complete instructions on their website.

 

[1992 2.3LX]

I would pull back the carpet.

 

[Pnyxprz02]

Hey man i have the same car and no you dont have to take anything off. If your subframes came bare like mine did i would put a nice coat or two of paint on them before you have them installed. If not they will rust eventually. The only other thing i did was i went ahead and put the seat cross brace on before i got there. Hope that helps