Suspension Full length subframe connectors

Whiteboy209 · Nov 23, 2021

I have a 91 fox convertible and i am about to install full length sub frame connectors but when i got under there i am concerned about ground clearance issues. I have it lowerd 1inch and a half in front and 1 inch in back or vis versa i 4get wich one nd i already have issues with speedbumps with out sub frame connectors. Is there any low pro full lengths

KRUISR · Nov 23, 2021

Which ones did you get? Some are 1"x2" tubing and some are 1.5"x2" tubing.

I built my own using the Mathis Performance Handbook 2 instructions with 1"x2" tube. I added seat supports with a simple piece of angle iron.

I don't know how much I lowered my car, but based on current tire gap to wheel well I would bet I am at least in the same range as you.

I find parts of my exhaust will hit a speed bump before my subframes will (usually right around the cats).

mikestang63 · Nov 23, 2021

never had an issue on any of my fox body cars with MM full length subs.

Ranger · Nov 27, 2021

KRUISR said:
Which ones did you get? Some are 1"x2" tubing and some are 1.5"x2" tubing.

I built my own using the Mathis Performance Handbook 2 instructions with 1"x2" tube. I added seat supports with a simple piece of angle iron.

I don't know how much I lowered my car, but based on current tire gap to wheel well I would bet I am at least in the same range as you.

I find parts of my exhaust will hit a speed bump before my subframes will (usually right around the cats).

if you honk the horn many cats will scurry away ... it's the squirrels that cause me concern

Suspension Full length subframe connectors

Whiteboy209

New Member

KRUISR

mikestang63

Ranger

Similar threads

Suspension Full length subframe connectors

Whiteboy209

New Member

KRUISR

mikestang63

Ranger

Similar threads

Privacy & Transparency

Privacy & Transparency