Rather then spend more money on my current heads(windsor Seniors iron), I wanted to get something that would match up more with what I have. The heads I have are 2.02 intake and 1.60 exhaust with 54cc combustion chambers. The heads need new seals and guides, but other then that they are fine....just a little sluggish on the velocity side 
.
I was looking into getting a set of Edelbrock RPMs with the 2.02 intake and 1.60 exhaust valves. My pistons are notched/eyebrowed so clearance shouldn't be an issue. I choose these heads so I have room to grow in the future incase I want to upgrade. The cheapest I found these heads for was $995 from propowerparts.com. Anyone know of a cheaper/reliable place?
Also, will my current cam work well with these heads?
Comp cam 35-302-8 .512 intake .533 exhaust
duration at .05 220 intake 224 exhaust
lobe seperation 112
I have more questions but my mind is mush from reading all the info on heads.....thanks for any help
Fred
.I was looking into getting a set of Edelbrock RPMs with the 2.02 intake and 1.60 exhaust valves. My pistons are notched/eyebrowed so clearance shouldn't be an issue. I choose these heads so I have room to grow in the future incase I want to upgrade. The cheapest I found these heads for was $995 from propowerparts.com. Anyone know of a cheaper/reliable place?
Also, will my current cam work well with these heads?
Comp cam 35-302-8 .512 intake .533 exhaust
duration at .05 220 intake 224 exhaust
lobe seperation 112
I have more questions but my mind is mush from reading all the info on heads.....thanks for any help
Fred
