Going Solid, Need Parts List

[99CobraJMS]

Going Solid Axle, looking for a web page or thread that has an excellent parts list of what is needed. Did searches and came up empty.

John

 

[99SVTAddict]

Most people here do a swap. I purchased everything new. There were a lot of misc parts too.

If you want, I can pull out the invoice write up later today and copy what is writen there. Let me know.

 

[99CobraJMS]

Please do I plan to buy new. Thanks for the offer. John

 

[91notch5.0]

i would try to find someone to trade rear ends with. i'm sure someone with a newer stang wants the independant

 

[bhoke24]

I AM JUST FINISHING MY AXLE SWAP, YOU WILL NEED A 99 UP REAR END WITH ABS RINGS, UPPER & LOWER CONTROL ARMS, ROTORS, CALIPERS,QUAD SHOCK MOUNTS, CATBACK, DRIVESHAFT, AND A FEW THINGS I DID KNOW OF IS YOU WILL NEED ABS/SPEED SENSOR CABLE, AND HANGER BRACKETS TO HOLD UP CATBACK. HOPE THIS HELPS, IF YOU HAVE ANYMORE QUESTIONS LET ME KNOW.

 

[99CobraJMS]

Thanks for the list, maybe I will look for a local swap..This will start to add up.

John

 

[99SVTAddict]

I put the list on your post at SVTPerformance

 

[99CobraJMS]

Cool, Thanks...John

 

[Cobra Jay]

I'm getting a new complete axle for my 03 GT, a 31 splie 4.10. I might be able to get the origional factory one back for you. The car only has 1,100 miles on it right now, and the new one is is supposed to be done in 3-4 weeks. So I figure the mileage will be somewhere around 2-2,200 by then. I'll send you a P.M. when I find out if I can get the other one for you. If you find something before then let me know.

 

[kezell]

I AM JUST FINISHING MY AXLE SWAP, YOU WILL NEED A 99 UP REAR END WITH ABS RINGS, UPPER & LOWER CONTROL ARMS, ROTORS, CALIPERS,QUAD SHOCK MOUNTS, CATBACK, DRIVESHAFT, AND A FEW THINGS I DID KNOW OF IS YOU WILL NEED ABS/SPEED SENSOR CABLE, AND HANGER BRACKETS TO HOLD UP CATBACK. HOPE THIS HELPS, IF YOU HAVE ANYMORE QUESTIONS LET ME KNOW.

Were all these parts already on the 99up gt rears?

What other parts do you need besides whats on the GT rear?

 

[Nazman]

Just finished mine on Friday along with new gears.

Swaped with an 04 GT/4000 Miles.

Easy swap, if you purchase do not forget the pinon snuber mount, and the brakets to mount the LCAs.

If swapping the hardes part was to line up the IRS on the GT since, its a MOFO to line up.

Naz