Gonna sell the Stang

Guero · Oct 20, 2006

wytstang said:
Be a MexiCAN not a MexiCAN'T ......

How did i miss this!!!!!!!!!!!! Oh **** that was funny!!!!!!!!!!!

HISSIN50 · Oct 20, 2006

WhiteStallionGT said:
I feel ya Guero.

wytstang · Oct 20, 2006

LOL I thought it was funny as well hehehehehe

BlackVert · Oct 20, 2006

how much oil is it losing every tankful? how do the spark plugs look?

i had a lot of oil in my intake but i was also losing abut a quart every tankful. i think i blew a ring with my kenne bell because the #8 plug hole had oil coming out of it and the plug was completely covered with oil.

i felt like getting rid of mine too because it has been a year since i have driven it without something bugging me and worrying about it. but now that i have a new motor going in, i'm excited about it again.

GRGT1994 · Oct 20, 2006

Guero said:
Ever since i did the stupid heads and cam its been a POS. Right i need a better MAF, something to fix all the oil going into the intake. And its piss slow!! It was faster when it was stock. Im just tired of dealing with it. So its for sale. Make me an offer

Holy crap man, can I buy it!!! Oil in the intake, runs like a POS, needs more parts!!! Sign me up man.

I feel for ya man. I been there. Sucks ash. Hang in there and work methodically to clear your issues. You'll get 'er running. Plus we can't lose the Guero from Stangnet. It would just be too boring without ya!!!

Guero · Oct 21, 2006

HISSIN50 said:

Jealousy i suspect????

Dont worry you can pop a feel to!!!!!

Its about 1 quart to 3000 miles more like 1/2 i think

Guero · Oct 21, 2006

and i will check the plugs tomorow when i redo the header gaskets

final5-0 · Oct 21, 2006

OK Mr. G

Time to face reality with a heavily modified combo

It is gonna require more thought and effort on your part to make all the differnet parts gel together.

Just one example for you here

Oil in the intake

I get a little myself

My 95 is a weekend toy only so I have placed the fix on the back burner as the prob is less of a hassle than it would be if the Stang was my dd.

I gutted the oil splash thingie to make room for my Scorpions.

I have thought about getting two half moon shaped pieces of metal and welding one to each side of the oil filler tube to prevent splash from being sucked up by the vacuum of the hose on the tube.

You gotta work with all kinds of little issues you create such as our talked about example when you do the mod thing to your Stang.

Heck ... That is what Hot Rodding is ALL about

I try to point out things like this to peeps on here when they ask about doing a lot of mods to their dd Stang.

You see the from those peeps who even use a kit such as the the one from TFS where EVERYTHING is supposed to be provided to minimize the hassle.

Bottom Line here is ............

With the H/C/I upgrade project and the Tweecer ............
you've put yourself in a position where you are ... in over your head.

That is good as that is how you learn

I've had my eye on you
and
You have my respect for all of your efforts

I know from your perspective, you don't see it
but
You are very close to having things all worked out

Like Danny said ... Be a Mexi-can
(that one will be a 94-95 :SNSign: classic for all time to come)

Come on ... Be Honest here ... You've Learned a lot ... Right?

You have the benefit from all the 94-95 SN group who have been down the modification road you've chosen before you.

I have built countless combos and will say this ...............
It takes time to work out all the little bug a boos

DO NOT GIVE UP MY FRIEND

YOU CAN DO IT

We can
and
will help you

Grady

Guero · Oct 21, 2006

final5-0 said:
I've had my eye on you

Is there like e-restrain orders???Lol STOCKER!!!!!!!

jk

Yeah i have learned alot. I would be nowere close to were i am now cuz if i had payed labor, I wouldn't be able to afford all the little things. Thanks for your help and evryones to.

And on the V/C, im gonna fab something up today as soon as go to Ford and buy some stuff. Im also goona through in a PCV screen, for added aid. Im gonna steal ur idea about the half moon thing, i have something that would work perfectly. Thanks.

Guero · Oct 21, 2006

final5-0 said:
Like Danny said ... Be a Mexi-can
(that one will be a 94-95 :SNSign: classic for all time to come)

I give him props that was very funny

lol jk

Black Stampede · Oct 21, 2006

I sure hope you did, but if you havent had it tuned yet and you are pissed about it not running right then sell it because you don't deserve to own it.

final5-0 · Oct 21, 2006

Guero said:
And on the V/C, im gonna fab something up today as soon as go to Ford and buy some stuff. Im also goona through in a PCV screen, for added aid. Im gonna steal ur idea about the half moon thing, i have something that would work perfectly. Thanks.

Not to say my idea is the best idea

I was thinking about putting each piece on opposite sides pointing down at an angle.

For me it would be no biggie as my fill tube is in two even pieces.

I thought about one at the bottom of the tube close to the top of the vc and the other piece at the top of the same half of the tube.

Hopefully, the angle of the pieces will not cause a hassle with oil fills and the location of the pieces of metal will be low enough a funnel still can be used.

Anyway ................
just something to prevent splash from getting up the tube.

Grady

Zero Signal · Oct 21, 2006

I'll give you $1500 for it. Seriously though, you'll get the most money if you part out the good stuff and revert the car back to stock if you still have the old parts.

Guero · Oct 21, 2006

No old parts

Guero · Oct 21, 2006

final5-0 said:
Not to say my idea is the best idea

I was thinking about putting each piece on opposite sides pointing down at an angle.

For me it would be no biggie as my fill tube is in two even pieces.

I thought about one at the bottom of the tube close to the top of the vc and the other piece at the top of the same half of the tube.

Hopefully, the angle of the pieces will not cause a hassle with oil fills and the location of the pieces of metal will be low enough a funnel still can be used.

Anyway ................
just something to prevent splash from getting up the tube.

Grady

It may not be the best but as i was reading, i had a clear picture of what it may look like

final5-0 · Oct 21, 2006

Guero said:
It may not be the best but as i was reading, i had a clear picture of what it may look like

Well there you go then

Just get after the biz of making things like they need to be

and

No More Whining

After All

You are NOW!
and
You are FROM THIS POINT ON!

gonna be known as ..........

THE MEXI-CAN

Grady

Guero · Oct 21, 2006

LOL!!!!!!!!!!! Im just waiting for my mom to leave cuz she wont let me park in the garage

wytstang · Oct 21, 2006

You my boy blue

HISSIN50 · Oct 21, 2006

Guero said:
Jealousy i suspect???? Dont worry you can pop a feel to!!!!!

Be careful or Grady will think you peep through the same keyhole that I do.

And I don't wanna' pop anything.

I've been trying to pick up the slack since the resident nasty-reference-maker (The father of Drake) has been MIA on SN.

Guero · Oct 21, 2006

Damn you Hissin!!!! POP IT damn it!!!!!!!!!!!!

Gonna sell the Stang

Guero

Active Member

HISSIN50

"How long does it take to get help in here?

wytstang

Mustang Master

BlackVert

GRGT1994

New Member

Guero

Active Member

Guero

Active Member

final5-0

Mustang Master

Guero

Active Member

Guero

Active Member

Black Stampede

final5-0

Mustang Master

Zero Signal

Active Member

Guero

Active Member

Guero

Active Member

final5-0

Mustang Master

Guero

Active Member

wytstang

Mustang Master

HISSIN50

"How long does it take to get help in here?

Guero

Active Member

Similar threads

Gonna sell the Stang

Active Member

"How long does it take to get help in here?

Mustang Master

New Member

Active Member

Active Member

Mustang Master

Active Member

Active Member

Mustang Master

Active Member

Active Member

Active Member

Mustang Master

Active Member

Mustang Master

"How long does it take to get help in here?

Active Member

Similar threads

Privacy & Transparency

Privacy & Transparency