good for 300 rwhp?

[96 GT JOE]

i have a 96 gt m5 and am considering:

-stage 2 p&p headswap kit from steen racing
http://www.steenracing.com/products.htm
-comp cams XE270AH
-comp valve springs
-3.73's
-good tune

i imagine she would be pretty quick after those mods. problem is i'll only have around 2500.00 at the most to spend. let me know what you guys think.

 

[deftsound]

id say youd have more than 300hp if you get a good flowing exhaust goin

 

[96 GT JOE]

i have a mac o/r h pipe, and dumped flowmaster 40's

 

[98stangv8]

you won't make it unless you have a pi intake, and all the other bolt ons to go with it...check my sig and see what I made..

are you getting a tune too?

 

[SilverFoxbody]

I would not forget some VB mods for the trans.

 

[invertmast]

I'd say you probly have about 250-270 ish right there. Throw on some longtubes, PI intake, upper intake and a TB and you'd be at 300

 

[deftsound]

i dont understand, i just read a post from a guy that put new comp cams in and was at the 285 mark with stock pi heads and boltons. Seems to me if you had aftermarket heads and cams and a good exhaust/intake goin youd be atleast at 300

 

[HoustonGT]

i dont understand, i just read a post from a guy that put new comp cams in and was at the 285 mark with stock pi heads and boltons. Seems to me if you had aftermarket heads and cams and a good exhaust/intake goin youd be atleast at 300

He also had a bunch of other bolt-ons. With a plenum, tb, headers, maybe pullies and then the cams and headswap he'll be at 300