Good price/combo for x-302 gt-40 heads

5.0Stang

Founding Member

Aug 5, 2000

778

0

0

South Lyon, MI

May 20, 2004

#1

• May 20, 2004

• #1

The heads are the aluminum GT40 heads with a stage one port job (done by livernios motorsports) with 0 miles on them, never bolted to a car. Hes selling them to me for 500 bucks. Also hes selling an E or a B cam for 50 bucks. How well will these work on a stock block and a Trickflow TRACK HEAT intake? How much HP to expect?

thanks,
alex

 

houstonstangguy

Founding Member

Mar 16, 2002

979

0

0

Houston, Texas

May 20, 2004

#2

• May 20, 2004

• #2

for 550.00 that is a pretty good deal, if the cam is in good condition.

what other mods do you have? exhaust? throttle body?

 

tmoss

Gettin Wired

Founding Member

Jun 28, 2001

7,153

32

128

Saint Louis, MO

May 21, 2004

#3

• May 21, 2004

• #3

That's a very good deal. The intake is on the large side for those heads. Know what the heads flow? If not - ask!

 

houstonstangguy

Founding Member

Mar 16, 2002

979

0

0

Houston, Texas

May 21, 2004

#4

• May 21, 2004

• #4

yeah i agree with tom about the intake. you should either get one of his ported stockers, or trade me for my ported cobra!

 

QDRHRSE

New Member

Dec 31, 2002

1,590

0

0

Palmdale, CA

May 21, 2004

#5

• May 21, 2004

• #5

If you don't want the stuff I'll buy from you for $100 more!!! Excellent deal. What are you thinking....you should have that stuff in your garage already.

 

5.0Stang

Founding Member

Aug 5, 2000

778

0

0

South Lyon, MI

May 21, 2004

#6

• May 21, 2004

• #6

They were ported to flow better then the trick flow heads so i plan on keeping the intake.
I have a 65mm TB, 73mm Mass air meter, shorty headers, off road x, dynomax, and underdrive pullies with an AOD with a shift kit, 2700 stall, etc and 4.10's with a drag suspension.

 

houstonstangguy

Founding Member

Mar 16, 2002

979

0

0

Houston, Texas

May 21, 2004

#7

• May 21, 2004

• #7

a stage one port job wont outflow trick flows but they are still decent heads and even better with some port work. I would get the flow sheet on em too so you know exactly what you are getting, and not just someones word on it.