Got a new TB today

[1105]

Ordered a 75mm Accufab Race TB last week and got it in today. I was suprised at how well it looks and feels. This makes my FMS TB look like it was put together by kids. From what I've heard they say its the best TB out there, and I can see that now. Heres a pic of it, opening in the front is 90mm and the back is 75mm. Thats just the way the "Race" throttle bodies are setup from Accufab

 

[Blackened302]

looks good. we installed one of those on my buddy's 2001 gt along w/ some pullies and a diablo tuner--man, that baby purrs.

 

[Grn92LX]

Can I borrow that?

 

[urban96]

sweet

 

[20new5.0]

That looks badass, I'm getting a edelbrook 75mm for $200, how much did yo pay for that piece of work?

 

[_MATiC]

it's so shiny! ..and purrty

 

[1105]

paid $225 plus shipping from jdsperformance.com

It took a little over a week to get it because they had to send the order off to Accufab because they only do drop shipping.

Grn, haha you wish

 

[Joe 5.0]

They dont make any for the 94/95's, do they?

 

[94GTLaserRC]

Ordered a Accufab Race TB last week and got it in today.

Ordered a 75mm Accufab Race TB

I didnt know you convered to Fox TB style.

RC

 

[1105]

Joe, they made a few diff sizes for 94/95's but not sure if they still are. The site I ordered it form said they don't have any 94/95's in stock.

RC, yea I'm doing the fox swap. I have all of the parts ready for when I go to put my car back together.

 

[OrangeMustangGt]

now you gotta get a reducer down from that 90mm! what size intake piping are you using? 2.5, 3?

 

[94opalgt]

accufab does not,nore have they ever made one for a 94-95.and after talking to george the owner,they never will.he told me they wouldnt cuz they tried with 65-70-75mm and couldnt make anymore power than with the stock tb.he said it was because of where the egr hole was in the elbow.

 

[91LX_5L]

yea that looks wicked, looks very well built, keep us informed if u can tell a diff.

 

[zenboy99]

accufab does not,nore have they ever made one for a 94-95.and after talking to george the owner,they never will.he told me they wouldnt cuz they tried with 65-70-75mm and couldnt make anymore power than with the stock tb.he said it was because of where the egr hole was in the elbow.

Exactly right! Thats the same thing George told me at a local FFW race. Their Fox TB's are awesome, from what I've heard, their 70mm throttle body that I have flow's as well most 75mm's.

 

[94GTLaserRC]

accufab does not,nore have they ever made one for a 94-95.and after talking to george the owner,they never will.he told me they wouldnt cuz they tried with 65-70-75mm and couldnt make anymore power than with the stock tb.he said it was because of where the egr hole was in the elbow.

As far as I know, they "did" make them for our cars...In fact, some of my older Mags have them advertised in there... Even websites a few years ago had them listed for 94/95, but when you would call, they didnt stock them.

I remember Joe and I went through this stuff 2 1/2 years ago.

RC

 

[mytight95]

agreed, they DID make them, but don't anymore, you can still pick one up every once in a while in the classifieds on here or corral...


jason

 

[1105]

The site I bought it off of had TB's for 94/95 advertised, but said they did not have any so they DID make them at one point in time.

Kyle, I'm going to be running 3" piping up to the TB and just get a silicone reducer from 90mm (however many inches that is) down to 3"

I remember Joe and I went through this stuff 2 1/2 years ago.

RC

I remember that too

 

[Killercanary]

Yes, they did make them but they made VERY few. There was a BIG discussion on this a few years ago.

The TB looks great Zach, I can't wait to see how it turns out. I started getting parts this week myself for my buildup !

 

[94GTLaserRC]

The site I bought it off of had TB's for 94/95 advertised, but said they did not have any so they DID make them at one point in time.

Kyle, I'm going to be running 3" piping up to the TB and just get a silicone reducer from 90mm (however many inches that is) down to 3"



I remember that too

25.4mm is one inch... That's why a 9/16" socket is so close to a 13mm in size......each is just over 1/2 of one inch.


You can try turbohoses.com for the reducer.
RC

 

[1105]

1/2" is a little closer to a 13mm . I think 9/16" is close to a 15mm.

Thanks for the site. I'll check them out to see if they have what I need.