• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Got dynomax's installed

  • Thread starter Thread starter merc123
  • Start date Start date May 20, 2004

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 20, 2004
#1
  • May 20, 2004
  • #1
Had the Dynomax Super Turbo's installed. They're a little louder than stock and have a more deeper rumble about 1500-2000 RPM. I still want them to be louder and hold the rumble better but my mom said they're loud when I came up the drive way tonight.

I'll try to get some vids/sound clips soon. All the guy did was cut the mufflers off and weld these in. I'm probably going to get an X in the next few months.


SOTP Gains: Not bad at all. I could definitely feel it pulling harder.
 

nickthegenius

Active Member
Dec 23, 2002
1,631
1
38
Elwood, IN
May 20, 2004
#2
  • May 20, 2004
  • #2
Those have always been popular with the 5.0L crowd and not overly expensive. The fact that they don't drone much is a big plus.
 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 21, 2004
#3
  • May 21, 2004
  • #3
I actually don't quite like it NOT droning However, I plan on getting an O/R H, X or prochambers so the sound I'm looking for should be there.

I just didn't want the flowmaster sound.
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
May 21, 2004
#4
  • May 21, 2004
  • #4
merc123 said:
I actually don't quite like it NOT droning However, I plan on getting an O/R H, X or prochambers so the sound I'm looking for should be there.

I just didn't want the flowmaster sound.
Click to expand...

how much did you pay for them each?

on edit: i'm going to assume that the Dynomax Super Turbo Mufflers are the deepest sounding of all the dynomax mufflers correct? If so i'm about to order some off Jegs unless you know of a place that sells them cheaper.
 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 21, 2004
#5
  • May 21, 2004
  • #5
Not sure

The guy that did them did it for $150 installed.
 
C

CottonBurnerz

Banned
May 10, 2003
1,554
0
0
Drink and Drive = Teh Lose
May 21, 2004
#6
  • May 21, 2004
  • #6
cool dude.. can't wait to hear the clips..!
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
May 21, 2004
#7
  • May 21, 2004
  • #7
merc123 said:
Not sure

The guy that did them did it for $150 installed.
Click to expand...
i re edited.. the previous post..
 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 21, 2004
#8
  • May 21, 2004
  • #8
Hope the camera will take decent clips. They are pretty much just like stock except a tad louder/deeper.
 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 21, 2004
#9
  • May 21, 2004
  • #9
KaPPaBaLL said:
i re edited.. the previous post..
Click to expand...

$50 sounds about right. The Super Turbos are the deeper sounding. The Ultra Flo's are more comparable to the SLP loud mouths. They are just a straight flow design that is virtually a straight pipe. I chose the Super Turbos because they are 400CFM and the Ultra Flo's are 1000CFM or so. I wanted a lower CFM for more HP/TQ down low. I figured the Ultra's would take some low end down.
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
May 21, 2004
#10
  • May 21, 2004
  • #10
merc123 said:
$50 sounds about right. The Super Turbos are the deeper sounding. The Ultra Flo's are more comparable to the SLP loud mouths. They are just a straight flow design that is virtually a straight pipe. I chose the Super Turbos because they are 400CFM and the Ultra Flo's are 1000CFM or so. I wanted a lower CFM for more HP/TQ down low. I figured the Ultra's would take some low end down.
Click to expand...


good werd.. I already have a MRT off road H-pipe with 2chamber flowmasters and don't like the quality of the sound. After hearing couple clips of the super turbo i was sold. And the price.... unbeatable. Thanks for the help.
 

merc123

Active Member
Jan 27, 2003
420
2
39
North GA
May 21, 2004
#11
  • May 21, 2004
  • #11
No problem. Let me know how the MRT O/R H helps the sound.
 

KaPPaBaLL

New Member
Nov 28, 2003
1,326
0
0
BAYAREA
May 21, 2004
#12
  • May 21, 2004
  • #12
werd..
 
You must log in or register to reply here.

Similar threads

Place to Avoid: Jamison Auto Group in Gulfport, MS
  • D Durden
  • Oct 20, 2025
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • 2 3
Replies
45
Views
2K
1965 - 1973 Classic Mustangs -General/Talk- Feb 4, 2026
nickyb
E
Finished my Fox Hydroboost Install - Tips
  • Engineer Duane
  • Apr 9, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 5, 2025
Engineer Duane
E
A
Fox Planning on building my foxbody and was wondering if I can get any tips or anything to watch out for!
  • Angelq1028
  • Oct 31, 2024
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2 3 4
Replies
76
Views
5K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 29, 2025
Robman8028
R
Took some pics, i do really own a mustang...
  • 2000xp8
  • Jun 20, 2023
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 6 7 8
Replies
148
Views
19K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 1, 2024
Mustang5L5
A
2003 GT 4.6 - Best exhaust from 3 options
  • Aj03gt
  • Feb 26, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
7K
1996 - 2004 SN95 Mustang -General/Talk- Feb 27, 2019
Dark04GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?