got my car dyno'd!

[5.0Torx]

hey all, got my car dyno'd today.

This is a picture of the printout. The comp at the dyno shop i went to didnt have internet access so they couldnt email me the image.

Not too bad for full exhaust stock 5.0

The 2 runs where it put down 213 hp was form removing the air filter (which i actually need to clean). But for going down the road, 207/274 are my numbers!

Thanks for looking

 

[Dino Dino Bambino]

208/274 is about right for a near stock 5.0 with only an exhaust. Did you change the headers or did you just change the H-pipe and catbacks?
Looks like you'll gain a few HP/TQ with a fenderwell CAI so you might wanna consider that next.

 

[jd-hart]

Looks like real good numbers. It seems to be running very well. Time for the upgrades.....

 

[5.0Torx]

thanks for the replies and im sorry it took so long for me to respond. moving back to school took time, and then i had no internet until last night.

yeah full exhaust, headers, mid, and catback all 2.5".

 

[GTOreturns]

Cool #'s!! Now get some air in there to match your exhaust! Never mind the cai, get a power pipe, 65mm TB and an 80mm MAF. And if you have 2-300 laying around a new Intake will wake that bad boy up. Throw in a set of gears and you have a whole new 5.0!

 

[93 teal terror]

Pretty close to what I dyno'd a few years ago. It seems to have lost some power now so its probably lower.
208/279

 

[5.0Torx]

Cool #'s!! Now get some air in there to match your exhaust! Never mind the cai, get a power pipe, 65mm TB and an 80mm MAF. And if you have 2-300 laying around a new Intake will wake that bad boy up. Throw in a set of gears and you have a whole new 5.0!

80 mm MAF? golly gee whiz bonkers batman thats big! I actually have a 73 mm C&L and it runs like crap. time to pay to play...

i actually have a 99 exploder motor in my garage, torn down. just waiting for some mustang down-time to come my way (winter, when i drive my F250 ) and a little bit more cash and then those E7s and everything on top of them are gone!

Does everyone here think a 70 mm cobra MAF will suit me ok?

 

[25thmustang]

E7s can be fun, don't knock them...

Numbers look spot on. Looks like even just a K&N would net you something.

 

[5.0Torx]

got a k&n!