• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-

Got my FF on3performance turbo kit!

  • Thread starter Thread starter 98COBRA281
  • Start date Start date Jan 13, 2012
Prev
  • 1
  • 2
  • 3
  • 4
  • …
  • 7
Next
First Prev 2 of 7 Next Last

TylerByers18

Member
Jan 4, 2012
110
5
18
Grand Prairie, TX
Jan 14, 2012
#21
  • Jan 14, 2012
  • #21
Im hoping to get the ff setup after tax return season baby
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 14, 2012
#22
  • Jan 14, 2012
  • #22
Noobz347 said:
YIKES! @ 80lb injectors. What HP do you expect to make?
Click to expand...

i want to fuel system to be able to handle 800+ on e85 so im just going big the first time and wont have to worry about it, E85 uses 30% more then gasoline also, so if a system can support 1000ish hp on gasoline, it can only handle 700ish on E85
 

slayerripkdc

15 Year Member
Jun 3, 2003
1,341
16
59
brewster ny
Jan 14, 2012
#23
  • Jan 14, 2012
  • #23
Supras and Terminators LOOK OUT! Here we come
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 14, 2012
#24
  • Jan 14, 2012
  • #24
go the hot side mocked up today! it all fits GREAT!

driver side


passenger side




merge pipe




 

Attachments

  • DSCN1673.webp
    91.4 KB · Views: 363
  • DSCN1676.webp
    62.6 KB · Views: 376
  • DSCN1677.webp
    68.1 KB · Views: 878
  • DSCN1678.webp
    51.5 KB · Views: 289
  • DSCN1675.webp
    63.1 KB · Views: 352
  • DSCN1674.webp
    58.9 KB · Views: 294

Night Shifter

Well-Known Member
Dec 24, 2005
1,710
27
59
Daytona
Jan 14, 2012
#25
  • Jan 14, 2012
  • #25
Looks awesome!

I have a 95mm pro m mass air meter if you want it..its calibrated for 42# injectors and was used on a turbo set up I had for a few months...can be reprogrammed for 80# injectors if needed...

Its been in my cabinet in the garage for about a year now so it should still be fine...I was gonna use it for this car but you and Ryan seem to be beating me to all the performance stuff lately and I still got a lot of suspension to do before I get to the turbo install on this car
 

TylerByers18

Member
Jan 4, 2012
110
5
18
Grand Prairie, TX
Jan 15, 2012
#26
  • Jan 15, 2012
  • #26
how much everything cost witht the chomeoly setup and everything so i can see what im up against probably going to go with the 70mm, and that looks bad ass and is coming along well
 

Stumbaugh

Member
May 13, 2010
903
13
19
Russellville, Ar
Jan 15, 2012
#27
  • Jan 15, 2012
  • #27
Good looking setup. I have heard of a few peoples running the ON 3 kit's. It seems like everyone is having a lot more luck with the new FF kit vs the old kit's. Time to switch to an auto if you want the best times out of that car.

Not trying to be a negative Nancy, but be prepared to buy a new wastegate. That is the one thing I have saw time and time again with the On 3 kit's, is that the wastegates seem to fail often.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 15, 2012
#28
  • Jan 15, 2012
  • #28
TylerByers18 said:
how much everything cost witht the chomeoly setup and everything so i can see what im up against probably going to go with the 70mm, and that looks bad ass and is coming along well
Click to expand...

i have $2700 in the kit and the turbo, on3 does not deal with master power anymore so i ordered it separately.

Stumbaugh said:
Good looking setup. I have heard of a few peoples running the ON 3 kit's. It seems like everyone is having a lot more luck with the new FF kit vs the old kit's. Time to switch to an auto if you want the best times out of that car.

Not trying to be a negative Nancy, but be prepared to buy a new wastegate. That is the one thing I have saw time and time again with the On 3 kit's, is that the wastegates seem to fail often.
Click to expand...

yea the new FF kits are mile's better quality and fitment then the old kits, honestly i dont think the fitment could get any better! and all the pipes look good and are thick! so will see how it holds up! and ive throw around the idea of going to a 4R70 with a manual valve body, stall, shifter ect,

ive already been thinking about the waste gate, thats not a big deal to me tho.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 15, 2012
#29
  • Jan 15, 2012
  • #29
got the oil filter relocation on today, i made a bracket the comes off a tranny bolt



 

Attachments

  • DSCN1681.webp
    23.7 KB · Views: 399
  • DSCN1680.webp
    42.9 KB · Views: 686

slayerripkdc

15 Year Member
Jun 3, 2003
1,341
16
59
brewster ny
Jan 15, 2012
#30
  • Jan 15, 2012
  • #30
You sir are very skilled at what you do!
 

TylerByers18

Member
Jan 4, 2012
110
5
18
Grand Prairie, TX
Jan 15, 2012
#31
  • Jan 15, 2012
  • #31
It was 2700 with the kmember kit?
 

tank_567

Active Member
Mar 19, 2007
731
26
29
Raleigh, Nc
Jan 16, 2012
#32
  • Jan 16, 2012
  • #32
98COBRA281 said:
thanks, it will be getting tuned, but i still need to do the whole fuel system, im going with a aeromotive A1000, sumped tank, -10 feed, -8 return, siemens 80lb injectors and im not sure on a MAF yet but ive been looking ito a SCT big air
Click to expand...

Check out ProMaf guys, Im running one of there mafs and my tuner enjoys it. Make sure to run a blow-through setup

http://www.promracing.com/the-facts-about-mass-air-flow-meters-page-9

EDIT

Also if you run a SCT big air your going to have to put the maf in front of the turbo and have to run a bypass valve. Running a blow-throught setup you can run a blow off valve and the air will be metered after the turbo.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 16, 2012
#33
  • Jan 16, 2012
  • #33
TylerByers18 said:
It was 2700 with the kmember kit?
Click to expand...

No, ive had the K for a year or 2 now

tank_567 said:
Check out ProMaf guys, Im running one of there mafs and my tuner enjoys it. Make sure to run a blow-through setup

http://www.promracing.com/the-facts-about-mass-air-flow-meters-page-9

EDIT

Also if you run a SCT big air your going to have to put the maf in front of the turbo and have to run a bypass valve. Running a blow-throught setup you can run a blow off valve and the air will be metered after the turbo.
Click to expand...

yea i was planning on running a blow thru setup, thanks i didnt know that about the SCT big air
 

TylerByers18

Member
Jan 4, 2012
110
5
18
Grand Prairie, TX
Jan 16, 2012
#34
  • Jan 16, 2012
  • #34
O Ok thanks looks new lol
 

midnightdriver

Active Member
Jan 3, 2010
443
2
27
Northern California
Jan 17, 2012
#35
  • Jan 17, 2012
  • #35
Now you have a cluttered engine bay . That car is going to fly through the traps, very nice job on the oil filter relocation, super clean looking. I wish I had your skills.

Every turbo build I see makes me want one even more, can't wait for some finished video's (please make them).
 

TylerByers18

Member
Jan 4, 2012
110
5
18
Grand Prairie, TX
Jan 18, 2012
#36
  • Jan 18, 2012
  • #36
+1
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 18, 2012
#37
  • Jan 18, 2012
  • #37
midnightdriver said:
Now you have a cluttered engine bay . That car is going to fly through the traps, very nice job on the oil filter relocation, super clean looking. I wish I had your skills.

Every turbo build I see makes me want one even more, can't wait for some finished video's (please make them).
Click to expand...

haha thanks! i hate clutter! yea im hoping it traps good considering it went 115 on motor, and i should be adding 200ish rwhp, shooting for 525rwhp
 

Mr. Rustypwnz

Advanced Member
Jun 1, 2005
1,761
63
69
indianapolis/ valdosta ga
Jan 18, 2012
#38
  • Jan 18, 2012
  • #38
just got real! Go with an auto, if you dont your ghey j/k. (autos be lovin the bewst)

You gonna drop the compression at all? 80lb injectors sound right for e85, and yes please use a blow-through meter as they are much better to tune on.
 

98COBRA281

10 Year Member
Nov 24, 2007
1,348
30
59
Port St. Lucie, Florida
Jan 19, 2012
#39
  • Jan 19, 2012
  • #39
Mr. Rustypwnz said:
**** just got real! Go with an auto, if you dont your ghey j/k. (autos be lovin the bewst)

You gonna drop the compression at all? 80lb injectors sound right for e85, and yes please use a blow-through meter as they are much better to tune on.
Click to expand...

Thanks! im really consider a auto... ive ridding in a few cars in the last few weeks with built auto's i really like it, one was a ls1 camaro with a turbo 350, and the other was just a 04 gt with a j mod and shifter, and that baby was banging gears pretty good!

nope! not doing anything to the bottom end..... just yet! thats why im going with e85 to stop any detonation that might happen, and ive been looking into the HPX MAF
 

AZmustang98

Member
Oct 19, 2011
373
17
19
Flagstaff, Arizona
Jan 20, 2012
#40
  • Jan 20, 2012
  • #40
Real cars have 3 pedals! Haha just kidding dude! Get that thing multiplying atmospheres!
 
Prev
  • 1
  • 2
  • 3
  • 4
  • …
  • 7
Next
First Prev 2 of 7 Next Last
You must log in or register to reply here.

Similar threads

E
For Sale 1989 LX Notch 410ci 85mm turbo 8 pt cage 9" rear end
  • EightyNineFive
  • Aug 22, 2021
  • Fox Body Mustangs For Sale (1979-93)
Replies
1
Views
4K
Fox Body Mustangs For Sale (1979-93) Jun 18, 2022
Freakinstang
F
T
For Sale 2003 Built & turbo 2003 Mach 1 $9000 OBO - *Salvage Title* *Huge Mod list*
  • Turbo03Mach
  • Feb 5, 2021
  • SN95 Mustangs For Sale (1994-04)
Replies
1
Views
5K
SN95 Mustangs For Sale (1994-04) Mar 6, 2021
MattMan02GT
M
On3 Performance Install Tips
  • flstang65
  • Dec 15, 2019
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
11K
1996 - 2004 SN95 Mustang -General/Talk- Mar 17, 2023
atomicfox236
A
N
SOLD Supercharged 1989 SSP Coupe $13,500 obo
  • notchlubber
  • Jul 17, 2018
  • Fox Body Mustangs For Sale (1979-93)
Replies
13
Views
13K
Fox Body Mustangs For Sale (1979-93) May 28, 2020
notchlubber
N
Turbo Talk
  • FoxMustangLvr
  • Jul 11, 2016
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
19
Views
1K
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 11, 2016
CarMichael Angelo
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?