Got some new parts

[ninjastang125]

So got some new parts for the track this coming season. Got a spec stage 2 clutch, ffrp 4.10s, moser 31 spline axles, mm flsfc, and a set of 26x10x15 mt et drags. still need a few things like a set of drag wheels and a 31 spline center section. Im looking for any advice on which wheels would look good and center section would work good.

 

[Mr. Rustypwnz]

so you ran a 12.7 WITHOUT gears?

diff's are all over the place, i would just get an exploder unit, but im lazy lol

wheels: weld pro starz..

 

[SteedaGT9150]

let me know if u ever plan to run at mason dixon.

 

[ninjastang125]

yes 12.7 without gearsand a 12.8 with a major slippage in the clutch.

I want a new unit and looking into the ffrp 31 spline lsd.


Where is mason dixon at? Me and a group of buddies are planning on some road trip races this year.

 

[ninjastang125]

So i just got done ordering my new ffrp 31 lsd for my rear. I also ordered something that i have been wanting for a while, CAMS. I am getting cms stage 1s. Everything will be getting installed in two weeks, I was wondering if i should get my car re-tuned or not. What do you guys think.

 

[SteedaGT9150]

yes 12.7 without gearsand a 12.8 with a major slippage in the clutch.

I want a new unit and looking into the ffrp 31 spline lsd.


Where is mason dixon at? Me and a group of buddies are planning on some road trip races this year.

washington county near boonsboro, its right off of 70

 

[deftsound]

I would recommend a firewall adjustor and new quadrant for that clutch.

I have the Spec stg2 and overall im pretty satisfied with it but i have to adjust it once a month or so and the firewall adjustor makes it a cinch.

 

[04GTBLKVERT]

You need to get your car re tuned.

 

[ninjastang125]

Thanks i didnt list that i also ordered a new cable, quad and firewall adjuster when i bought the clutch

I talked to my tuner today and he said 200 to retune so i will be getting retuned and hope i make over 300rwhp... on a race fuel tune

 

[ninjastang125]

Well i didnt order my cams, i couldnt pull the trigger im not sure if i want the cms stage 1s or hitech stage 2s. Anyone here run a cms or hitech cam?

 

[Rickyll7]

Well i didnt order my cams, i couldnt pull the trigger im not sure if i want the cms stage 1s or hitech stage 2s. Anyone here run a cms or hitech cam?

who is cms?

 

[ninjastang125]

cushman motorsports. They same guy who made the old vt cams

 

[atrain59]

I would go with hitech stage 2s i havent heard nothing but good stuff about those cams on 2 other forums im going to be buying them in the next 6 months for my stang

 

[ninjastang125]

I am having my tuner and my shop take a look at both cams and see which one is going to benefit me the most.

 

[ninjastang125]

So I am taking my car to my buddy's shop tomorrow to get my rear done (gears and 31 splines) and my new clutch installed. I am going to be ordering my cams once i decide on which ones are going to help me the most but im getting the rear done so i can see how much i am going to gain at the track. I also picked up a set of race star industries race wheels. They look like Weld pro-stars but you dont have to run a spacer on the front. I got 15x8s in the rear with 26x10 et drags and 15x4 skinnies on the front. The local strip opens up in 2 weeks and my quest for 11's is on. How much time did you guys pick up from a gear swap?

 

[Mr. Rustypwnz]

couple mph and roughly .5 sec.. you should gain ALOT with cams and gears, it wont be the same car..

 

[ninjastang125]

Well I went to the cecil county dragway last night with all of my new parts minus cams which go in on monday, and I was kinda disappionted. I ran a 12.55 at 108mph with a 1.75 60ft. Let me tell you it is a lot different launching on slicks, ans I'm in some need of some lca's. I was launching at like. 5500 and it felt good until my rear started hopping. So I'm going to get some lca next and try that and I might have to do some weight reduction to hit 11s but we will see.