Granetelli Forced Induction Oilling system

ricer-roni said:

keeps the engine oil clean, and is its own oil cooler. It is kinda expensive, but i was wondering if anyone has ever used one.

Click to expand...

..i wasnt aware that vortechs and other engine oil lubricated blowers were making the oil dirty....

Do u think a oil lubricated blower effects increases the oil temp of a motor? What point would the oil cooler serve, how effiecient could it possibly be?

if you need to invest in a seperate oiling system to keep your engine oil clean or "safe", then u need to be investing in a new blower. Yes, turbos and blowers heat up and emit heat into the oil, but that oil is already hot from the other 8 cylinders being slammed up and down at 6000 rpms.. your intake temp may rise, but not your oil temp.

I beg to differ

Anytime you have a turbo pushing 1500+ EGT thru it - it WILL heat up the oil. I have watched on nice mechanical gauges the oil pressure start dropping after high boost turbo runs.
Vehciles without an oil cooler will note considerably higher oil temps. Lots of turbocharged vehicles will see oil totally temp fragged. One of the reasons why turbo and forced induction recommend running synthetic is it's ability to withstand coking in the oil feed and return lines.
It's not just the decrease in pressure due to severe heat, but the coking will diminish the flow to the turbo/SC- that will destroy the bearings.

An externally contained oiling system is a good idea. But on a stang, a good high volume oil pump with an inline oil filter on the supply side, and a good high flowing oil return should do ya fine.