Grinds into 2nd gear

shawnster

New Member

May 17, 2003

78

0

0

Akron, Ohio

Mar 23, 2004

#1

• Mar 23, 2004

• #1

my car is grinding going into 2nd gear when I'm getting on it..what do I need to do to fix it? can the clutch cable be adjusted?..oh..its a 88gt

 

91LX302

Founding Member

Jun 22, 2002

248

0

16

Boston, MA

Mar 23, 2004

#2

• Mar 23, 2004

• #2

sounds like the 2nd gear synchro is on the way out. mine does it sometimes when cold, I have to make sure I shift slow.

btw, nice avatar

 

shawnster

New Member

May 17, 2003

78

0

0

Akron, Ohio

Mar 23, 2004

#3

• Mar 23, 2004

• #3

It didnt do it when I parked it in October..It just started when I pulled it out yesterday and the motor was still cold..I hope to god its not the synchros!! I just put a a$$load of money into that car over the winter..Oh..is your avatar Christopher Moltisanti and Adriana La Cerva? if so, Welcome to the family!!

 

88stangmangt

Active Member

Nov 25, 2003

2,332

1

48

Stafford,VA

Mar 23, 2004

#4

• Mar 23, 2004

• #4

ya sounds like worn down syncro's

 

shawnster

New Member

May 17, 2003

78

0

0

Akron, Ohio

Mar 23, 2004

#5

• Mar 23, 2004

• #5

If it is the synchros, has anybody ever replaced them? how hard? I know you have to pull the tranny but do you have to tear it apart to get to them? I'll drive it again Saturday and see if it does it again..If it does, I might just have to break down and buy a Tremac..are they good transmissions?

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

Mar 23, 2004

#6

• Mar 23, 2004

• #6

Some of them are. Your T5 is a Tremec, as are the T45 and 3650- all of which are stock Ford and none of which are considered to be spectacular. Does it only do it when it's cold? None of the linkage or internals are going to work as well as they can and should if it hasn't all warmed up yet. Do you have a good shifter on it? If you're still using the stock one and you shift hard, you haven't been protecting the transmission and it could be the synchros starting to go. If you put a good shifter on it quick, you may nip it in the bud.

 

shawnster

New Member

May 17, 2003

78

0

0

Akron, Ohio

Mar 23, 2004

#7

• Mar 23, 2004

• #7

It has a Hurst Shifter in it..I wasnt shifting it hard..I baby this car..I only drove it around the block though so I dont really know if it will keep doing it once the car has been running for a while(its been in the garage for 6 months) hopefully, if its nice out Saturday, I'll take it out for awhile and see what it does

 

R

redterror302

Founding Member

Jun 29, 2002

895

0

0

Mertztown, PA or State College, PA

Mar 23, 2004

#8

• Mar 23, 2004

• #8

Do you still have the stock clutch quadrant on it? If so you could pull up on the clutch pedal itself and listen to hear if it clicks. That might help a little. Also, you have to realize that the tranny fluid has been sitting all winter. Let it warm up a bit, and I bet the shift will be a lot smoother.

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

Mar 23, 2004

#9

• Mar 23, 2004

• #9

shawnster said:

It has a Hurst Shifter in it..

Click to expand...

Which one? The billet plus is the only one that does any good. Sounds like you need to let it warm up regardless. Maybe time for a tranny service too. Dump some new DM3 in there and see what happens.

 

TrophyHead

15 Year Member

Mar 18, 2003

1,195

11

49

PA

Mar 23, 2004

#10

• Mar 23, 2004

• #10

If its not popping out of first gear I really dont think your losing your tranny. The synchro teeth are probably baffled and not grabbing the gear right. I'd defintely replace the tranny fluid soon.

Is your clutch pedal making any squeeking noises when your step on it? Usually this means you need a new clutch quadrent/cable.

When I lost my tranny it was popping out of first like crazy and grinding into every gear except 4th. I'd try not to get to heavy on 2nd gear.

 

shawnster

New Member

May 17, 2003

78

0

0

Akron, Ohio

Mar 25, 2004

#11

• Mar 25, 2004

• #11

thanks for all the comments!, I finally got to drive it today for about an hour..it did not grind that bad once it warmed up..The guy I bought the car off of said he put a bbk quadant in it but I havent checked..I hope it just needs adjusted..He said He put a king cobra clutch in it and said the tranny was checked out and said it was perfect..I dont think He's BSing me because he said the car starts running like crap after 4k which I fixed by getting a idle speed control and HE gave me dates on when the car changed owners(had 3 off them) and I car-faxed it and He was right on Im going to change the tranny fluid saturday..BTW, what is DM3? and how many quarts does the tranny hold? the haynes manual doesnt tell you

 

stangbear427

Active Member

Nov 11, 2002

2,401

1

49

New England

Mar 25, 2004

#12

• Mar 25, 2004

• #12

Dextron/Mercon 3. The tranny fluid recommended by D&D for T5's.