gt40p heads install

natestang5.0

New Member
May 10, 2006
60
0
0
I started the install of my gt40p heads yesterday. So am i correct in saying i can't use my stock smog tubes that mount on the back of the heads. Do you guys just plug the big smog tubes? Should i just remove my smog pump at this point.? thanks any info is helpfull.
 
No, you cant plug it into the heads. Yes, you can remove the pump if your local emissions laws wont be a problem. Or you can just plumb it back into the exhuast if you want to make it look more like a factory set up.
 
Tonys89GT said:
No, you cant plug it into the heads. Yes, you can remove the pump if your local emissions laws wont be a problem. Or you can just plumb it back into the exhuast if you want to make it look more like a factory set up.

I did this with mine and had no issues. Just take off the diverter and use a heater hose splice to route it directly to the tube. BTW, the car in the sig got 25 mpg last week on a short road trip. If only the factory had built it like this....