GT40P heads

stevesLX

Member

Nov 12, 2006

373

0

16

cincinnati

Jul 18, 2007

#1

• Jul 18, 2007

• #1

I am looking at a set of GT40P heads. I have BBK long tube headers. Will these heads work alright with them headers as far as getting spark plugs in and out and the plug wires on them?

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Jul 18, 2007

#2

• Jul 18, 2007

• #2

BBK long tube headers on GT40P heads the Sparkplug will almost touch on headers and the sparkplugs wire boot will touch on header..you prolly could modify them to fit without the boot touching by modifying with a hammer and file....

 

stevesLX

Member

Nov 12, 2006

373

0

16

cincinnati

Jul 18, 2007

#3

• Jul 18, 2007

• #3

O.K. what about mac long tube headers will those work or will I have the same problem?

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Jul 18, 2007

#4

• Jul 18, 2007

• #4

read this it may help http://www.allfordmustangs.com/forums/5-0l-tech/68782-headers-for-gt40p-heads.html

 

bill302

Active Member

Nov 2, 2005

2,131

1

46

alabama,gadsden

Jul 18, 2007

#5

• Jul 18, 2007

• #5

some more good info....http://www.jason.fletcher.net/tech/offsite/gt40p.htm

 

Mr. Rustypwnz

Advanced Member

Jun 1, 2005

1,761

63

69

indianapolis/ valdosta ga

Jul 18, 2007

#6

• Jul 18, 2007

• #6

teh macs fit fine, just make sure and get 90 degree boots.

 

68FBJJZ109

Member

May 2, 2005

357

0

17

Easton, PA

Jul 18, 2007

#7

• Jul 18, 2007

• #7

90 degree plug wires with BBK Long tubes working here.