guys with 4:10s chime in.

pistonhead351 · Aug 3, 2006

what gear are you guys going through the traps in? and also what rpm? on the street will they help me to jump ahead of cars before they get a chance to catch up. also what speeds do 3rd and 4th gear take you to. sorry for the newb questions. im replacing my howling 3:55's and rebuilding the trac-loc and i think 4:10s will be faster on the street than 3:73's.

grey5.0beast · Aug 3, 2006

for mostly street, i;d say stay 3.73s. 4,10s are too steep for street in a fox IMO

pistonhead351 · Aug 3, 2006

i dont care about mileage or highway driving either, it is a mustang afterall.

Aliate X · Aug 3, 2006

i love 4.10s, with all motor or nitrous, id never go anythng else, its so perfect on the street, you cruise around in 4th gear and everything, Highway driving is really not what people make it out to be, it relaly feels like what mustangs SHOULD come with. Its also fun to go from barely being able to chirp 2nd to totally roasting 1st 2nd an3 rd.

I go through tthe traps in 4th gear, with stock gears i went through in 3rd gear, the best way to imagine what 4.10 swill be like is just imagine everythign is 1 gear less, 4th is like 3rd and so on.

pistonhead351 · Aug 4, 2006

what rpm in 4th gear do you go through the traps at?

fiveoho · Aug 4, 2006

Aliate X said:
Its also fun to go from barely being able to chirp 2nd to totally roasting 1st 2nd an3 rd.

change in gears really make that much difference?

Jaswir · Aug 4, 2006

fiveoho said:
change in gears really make that much difference?

gears are about the best thing you can do to a mustang... feel in the pants wise! best bang for the buck!

ls1beater4eva · Aug 4, 2006

i have had 373s and now have 410. 410 is the way to go b/c for the slight higher rpm at 70 mph is not to much higher then 373 you will love 410s.

fiveoho · Aug 4, 2006

i knew gears make a huge difference. i was getting at that post above where it was said you go from chirping 2nd to roasting 2nd and 3rd....thats a big difference.

DeVus1 · Aug 4, 2006

fiveoho said:
i knew gears make a huge difference. i was getting at that post above where it was said you go from chirping 2nd to roasting 2nd and 3rd....thats a big difference.

The 4.10s will turn the tires faster. If you are already spinning in first, you will probably spin some in second. Unless you have a bunch of horsepower, you arent going to be roasting tires in 3rd or 4th.

fiveoho · Aug 4, 2006

DeVus1 said:
The 4.10s will turn the tires faster. If you are already spinning in first, you will probably spin some in second. Unless you have a bunch of horsepower, you arent going to be roasting tires in 3rd or 4th.

i kinda figured 3rd wouldnt spin, let alone 4th.

Grn92LX · Aug 4, 2006

grey5.0beast said:
for mostly street, i;d say stay 3.73s. 4,10s are too steep for street in a fox IMO

Huh?????

It depends on the application. I run 4.30's in my little pump gas streeter. Why? Because its the gear NEEDED for the combo to perform best. I had 3.73's and they were horrible for this combo.

I think some of you people need to get some first hand experience before hitting the reply button

83StangGlx · Aug 4, 2006

In out 86 gt we have 4:10's with the t-lock and i love them.

It will spin the tires all the way threw 1st, 2nd and and in 3rd it will catch.

Get 4:10 IMO there the best

DMAN302 · Aug 4, 2006

pistonhead351 said:
what rpm in 4th gear do you go through the traps at?

Did you get me PM on your questions? Did I convince ya ?

Dean85GT · Aug 4, 2006

My first time at the track with my formerly stock 85 gt with only an exhaust, 4.10s and broken T5 ran a 15.1 @ 94 mph. I was redlining on the stock tach when I ran through the traps.

pistonhead351 · Aug 4, 2006

DMAN302 said:
Did you get me PM on your questions? Did I convince ya ?

yup sure did thanks! im still debating between that cam or the tfs1 when i put my combo together. what is the actual lift on your cam with 1:6:1. .544?

DMAN302 · Aug 4, 2006

.512..Cam calls for 1.7s but I stepped down to take it easier on the valvetrain, the XE cams have very steep ramp rates and some sacrafice was made in hopes of being easier on the parts. Comp tech didn't see more than a few HP being the sacrafice, and the builder agreed...so that was the decision.

85_SS_302_Coupe · Aug 4, 2006

4.10s here but i'm swapping in a spare 8.8 with 3.73s to see if i can pick up some MPH in the quarter because my car tops out too fast. I'm nearly red lined in 4th when i cross the line, or at least i'm around 5k. I have a buddy with nearly the same setup as me and he's running almost a whole second faster than me because he's not destroying the tires off the line and he traps faster.

That said, i should point out that the last time i raced i had small tires all around, 215/60/15s so if i had a decent tire out back with probably 27-28 inch height that would hook, i'd probably run faster.

Woodrow · Aug 4, 2006

85_SS_302_Coupe said:
4.10s here but i'm swapping in a spare 8.8 with 3.73s to see if i can pick up some MPH in the quarter because my car tops out too fast. I'm nearly red lined in 4th when i cross the line, or at least i'm around 5k. I have a buddy with nearly the same setup as me and he's running almost a whole second faster than me because he's not destroying the tires off the line and he traps faster.

That said, i should point out that the last time i raced i had small tires all around, 215/60/15s so if i had a decent tire out back with probably 27-28 inch height that would hook, i'd probably run faster.

With the e-cam and ported heads you should leave the 4.10's in the car imo, put a 26x8or10 on it and you will be happy with the results.

If the motor is stock or mildly built stick the 4.10's in it, you wont regret it.

mantix33 · Aug 4, 2006

imo the 4:10's are freaking awsome. i love begin able to just fry them in 2nd, and get them to scream preaty good in 3rd... the down side is that 1st is usless around town but i dont care about that i just want to blow the little ricers away when they think they're bad and do a little burn out next to me at a light

guys with 4:10s chime in.

pistonhead351

flim hunter

grey5.0beast

Cookies should never be DUNKED!!!

pistonhead351

flim hunter

Aliate X

Member

pistonhead351

flim hunter

fiveoho

Jaswir

Member

ls1beater4eva

New Member

fiveoho

DeVus1

fiveoho

Grn92LX

Fidanza Man!

83StangGlx

Banned

DMAN302

My mom says thanks for the pearl necklace.

Dean85GT

New Member

pistonhead351

flim hunter

DMAN302

My mom says thanks for the pearl necklace.

85_SS_302_Coupe

it sucks (I know) to be on the receiving end

Woodrow

mantix33

New Member

Similar threads

guys with 4:10s chime in.

flim hunter

Cookies should never be DUNKED!!!

flim hunter

Member

flim hunter

Member

New Member

Fidanza Man!

Banned

My mom says thanks for the pearl necklace.

New Member

flim hunter

My mom says thanks for the pearl necklace.

it sucks (I know) to be on the receiving end

New Member

Similar threads

Privacy & Transparency

Privacy & Transparency