THELAW1 New Member May 24, 2004 12 0 1 Jun 9, 2006 #1 Jun 9, 2006 #1 I've notice my upper radiator hose get's hard , I have 180dg stat and a 3 core radiator, but I'm not over heating...thae gauge stay's between the A & L ...it don't get hard at idle, only when I drive 15 miles or more or really get on it
I've notice my upper radiator hose get's hard , I have 180dg stat and a 3 core radiator, but I'm not over heating...thae gauge stay's between the A & L ...it don't get hard at idle, only when I drive 15 miles or more or really get on it
bill302 Active Member Nov 2, 2005 2,131 1 46 alabama,gadsden Jun 9, 2006 #2 Jun 9, 2006 #2 yes its normal the system is holding approx. 15 lbs of pressure before it pushes coolant past the cap into reservoir.....
yes its normal the system is holding approx. 15 lbs of pressure before it pushes coolant past the cap into reservoir.....
B BadAndy Founding Member Feb 21, 2001 766 0 0 Ohio Jun 9, 2006 #3 Jun 9, 2006 #3 take the rad cap off COLD and start it and look for bubbles, might be headgasket time