Hardware with chin spoiler

[EH819]

I got the mach 1 chin spoiler for my car a few weeks ago and was just looking at it, cause I want to finally put it on today and I only have 4 of the push pins. Is that correct, or should there be more? Thanks

 

[mcmmotorsports]

Nope, that is correct. You need to buy the additional ones.
You can get some at Advance Auto, Autozone, Wal-Mart, etc... that will work just fine.

 

[myponyrocks]

I got mine from CDC and it came with all the pins.... And they arent push you push it in but its more like a molly bolt cause a screw widens it.

 

[04DarkShadowGT]

I bought mine from mustangtuning and didnt get enough for all of them, but they are very cheap to buy at autozone.

 

[Mustang5L5]

Yup, there should be 16 of them, plus 3 push pins already on the bumper.

They are black, and the part the pushes in has a phillips head screw slot on it. You drill out a 1/4" hole and simply push them in.

 

[ANGRMNGT]

I just broke out some stainless steal screws and screwed it right into the bumper...

 

[Mustang5L5]

Reason i used the factory plastic hardware is because if i ever hit anything with it, the plastic pins will pull out and i won't damage my bumper.

Thge plastic pins hold it nice and tight.

Plus plastic weighs less than metal so the car is faster

 

[04DarkShadowGT]

im with Mustang5L5 I would suggest just buying some plastic push things. I would rather sacrafise a $50 chin spoiler alone rather than a $50 chin spoiler and a $300+ bumper too.