• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Has any one changed the Evaporator on their Stang?

  • Thread starter Thread starter hivolt5.0
  • Start date Start date Apr 23, 2006
H

hivolt5.0

New Member
Jul 16, 2002
29
0
0
53
Fort Walton Beach, FL
Apr 23, 2006
#1
  • Apr 23, 2006
  • #1
I'm in the middle of converting my car's AC to R-134a and I need some help with the evaporator. I bought the AC conversion kit from 5.0 resto, which is a pretty nice kit, and I have it mostly put together. I also had to change the heater core, it was leaking badly, and I thought since I have to tear the dash out any way I might as well replace the evaporator while I'm in there; the AC kit doesn't come with the evaporator. Well, now that I have everything apart I realize the heater/AC box (what ever you call it) doesn't have an opening to change the evaporator. Do I just cut a hole in the box and then try to seal it back up?

thanks in advance for the help!
 
D

Daggar

New Member
Jul 19, 2004
3,902
5
0
Apr 23, 2006
#2
  • Apr 23, 2006
  • #2
Unless it's broke, don't fix it. I mean, why change the evaporator?
 

Fett

New Member
Nov 2, 2004
766
6
0
Apr 23, 2006
#3
  • Apr 23, 2006
  • #3
Unless you NEEDED new parts (condensor, compressor, lines, ect) then you wasted your money on that kit. You don't need to change any of those parts to convert to R134. The only thing you needed was a set of R134 charging port adapters....which can be purchaced at any auto parts store for about $15.

As far as changing your evap...if you are already pulling your dash out completly to change the heater core, I wouldn't waste even more money. You can simply pull your dash back to change the heater core, it is very simple. But if you already have plans on pulling the dash out, then it's only a few more steps to change the evap core. But like mentioned above, if it isn't broken, why replace it?

Either way, if you haven't installed any of the 50resto kit....you should return it. $700 is WAY too much money for those components. If you needed them, you can buy them seperatly for much less. And again, there is no need to replace ANY of those parts just to convert to R134. Just buy the fittings, suck the system down well, add R134.
 
M

Mike92GT

Founding Member
Jan 23, 2002
583
0
0
Florida
Apr 23, 2006
#4
  • Apr 23, 2006
  • #4
I replaced mine awhile back while I was doing my heater core. I already had the evaporator case out of the car so I figured it would be a good time to replace it. They don't last forever, and didn't want to have to pull my dash a second time. Yes, you will have to cut the case to get it to come out. I used a hot glue gun to put it back together.
 
H

hivolt5.0

New Member
Jul 16, 2002
29
0
0
53
Fort Walton Beach, FL
Apr 25, 2006
#5
  • Apr 25, 2006
  • #5
Thanks guys for the replys!

To answer some of your questions, I already tried the $15 adaptors. The freon leaked out within the day. Not knowing where the leak was I wasn't sure where to start replacing things so when I saw the kit I bought it. I agree it is pretty expensive. $700 is better spent on something that will make the car go faster right?!?! Anyway, I did end up cutting the case and extracting the evaporator and then sealing it back up with blue silcone. Boy what a pain it was to pull the dash and stuff apart to get it. The AC kit actually went together very well, and it doesn't look bad at all. It is obviously not stock, but it looks nice. I have the car at the shop right now getting the system sucked down and R-134a installed.
 
You must log in or register to reply here.

Similar threads

B
Engine Installing A/C in a Non-A/C Car
  • bleedinggreen
  • Mar 18, 2024
  • Fox 5.0 Mustang Tech
Replies
16
Views
3K
Fox 5.0 Mustang Tech Apr 20, 2024
AeroCoupe
D
Engine Coolant and Radio Issues
  • Don7Up
  • Sep 14, 2025
  • Fox 5.0 Mustang Tech
Replies
17
Views
646
Fox 5.0 Mustang Tech Oct 4, 2025
Don7Up
D
M
Progress Thread mnky99 2001 V6 evap core, ac compressor, heater core replacement
  • mnky99
  • Sep 5, 2025
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
509
1996 - 2004 SN95 Mustang -General/Talk- Sep 5, 2025
mnky99
M
B
Electrical Fuse 8, Light Green / Black Wire
  • bleedinggreen
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
454
Fox 5.0 Mustang Tech Jun 26, 2025
bleedinggreen
B
M
2001 evap/heater core questions
  • mnky99
  • Sep 3, 2025
  • SN95 V6 Mustang Tech
Replies
3
Views
318
SN95 V6 Mustang Tech Sep 3, 2025
mnky99
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?