hatch back 1/4 window molding

They only come on the window unfortunately. Mine looked like ****, so I cleaned them up. Pretty basic stuff, just need to clean the rubber up with some degreaser, mask off the area around the window and sand them down to get rid of the pits from weathering (I went up to a 600 grit). Then spray a primer, sand that down and give it a shot of gloss or semi-gloss black paint. Some paints may not even require a primer. Its even easier with the window off of the car.

Do a search for my posts. I posted a detailed descriiption on how to remove the 1/4 windows.