Look at the top of your spoiler where it starts going up the hatch.. there are 2 or 3 bolts that hold it in, and water can seep though there and run through the channels in the hatch and leak onto the carpet in the hatch
I'm pretty sure those are just trim pieces to make the inside look finished. The actual seal is between the glass and the hatch on the outside. My trim piece shrunk in the corners and is about 6" short of joining up. I cut it and pushed it back in, no leaks here.
Mine was the same.. guess the stuff shrinks over time.. i redid mine twice because i thought i didnt stretch it enough and i still had about a 2 inch gap at the top.
Mine was the same.. guess the stuff shrinks over time.. i redid mine twice because i thought i didnt stretch it enough and i still had about a 2 inch gap at the top.
You don't need that interior decorative piece unless you just want it because it has no function. What you found on eBay is what you need but you only need one tube to re-seal and you can buy the urethane at NAPA or any Auto glass store. You need to run water around the hatch with someone inside watching to see the place on entry because it could even be the bolts(hinges) leaking or the hatch could be adjusted incorrectly and ruined the body seal gasket by being smashed down.