Head Gasket Set

I just wanted to make sure that this head gasket set would be fine? It seems the only thing I would need to get is a throttle body gasket and a GT40 intake manifold gasket. My engine deal wound up falling through and know I am just going to change out the head gaskets and my leaky front main seal.

Also I should send the heads to a machine shop to get milled and the valves and springs checked over, right?

http://store.summitracing.com/partdetail.asp?autofilter=1&part=FEL%2DHS9280PT%2D3&N=700+300563+4294908331+4294924760+4294840126+115&autoview=sku

yeah I just posted the summit link since it says more...I can get them at autozone for $75. Also I did blow a head gasket.

Also I dont think it is too bad the weird part is that, my car started having water in the oil after I jump started it. Not even reving it, just letting it idle. It ocurred on a really cold day too. Someone brought up the point that I could have cracked the block if I had mostly water instead of coolant but that is not the case. I mean there wasnt a ton of water in it because my radiator also started leaking so I shut off the car and just wound up checking my oil too and it had a thin line of yellow or beige going through it. I then drained the oil and it had some water mixed in with it. Also previous to that jump start I changed my oil 5 days before that and the oil didnt have any water in it.